Kawai CN31 manual Tuning, Use the Value buttons to raise or lower the pitch

Page 37

Page

37

1) TUNING

The TUNING function allows the piano’s pitch to be ﬁ nely adjusted, and may prove useful when playing with other instruments.

Step1

Hold down the TOUCH and TRANSPOSE buttons and press the PIANO 1 button.

2	1
	1
	Hold down both buttons.

The display will alternate between showing ‘tun’ (Tuning) and a number representing the pitch for ‘A’ in Hz (Hertz).

Step2

Use the VALUE buttons to raise or lower the pitch.

TUNING

= 427.0 ~ 453.0

The pitch will increase or decrease by 0.5 Hz increments each time one of the VALUE buttons is pressed. The range of adjustment is from 427.0 to 453.0 Hz (displayed as 27.0 – 53.0).

The factory default value is set to the modern standard A = 440.0 Hz (displayed as 40.0).

When pressing a key while using tuning mode, the sound that was selected prior to entering tuning mode will be heard. To use a different sound whilst tuning, ﬁ rst exit the tuning mode, select the desired sound, then repeat ‘Step 1’ and ‘Step 2’ again.

When the power is turned off, tuning settings will reset to the factory default value of 440.0 Hz (displayed as 40.0).

FUNCTION BUTTONS

5

Image 37

Contents Piano Playing Function Lesson Page Table of Contents Important Safety Instructions Conforms to the specified power voltage If you are going to use an AC power cordFailure to do so may result in fire Doing so may cause electric shockFailure to do so may cause breakdown of this Product is handled incorrectlyProduct and other devices Instruction for AC power cord U.K ‘ Pedals ‘ Front Panel‘ Headphones Adjust the volume level using the Master Volume slider Press the Power Switch to turn on the power‘ Setting UP the Piano Basic Operations‘ Demo Songs Press the Concert Magic and Lesson buttons simultaneously„ Preset Sounds ‘ Selecting a Preset SoundPlay the keyboard Two different sounds will be heard at the same time Step DualPress the Split button SplitLED indicator for the Split button will turn off Press the Split button to exit the split mode‘ Entering ‘FOUR HANDS’ Mode ‘FOUR HANDS’ Mode‘ Exiting ‘FOUR HANDS’ Mode To exit ‘Four Hands’ Mode, press the Split button againPress the Reverb button EFFECTS/REVERB‘ Adding Reverb ¡ Reverb‘ Adding Other Effects Press the Effects buttonSelecting the Touch Sensitivity Transposing the Piano To listen, press the Play Stop button Playing with Concert Magic‘ Selecting a Song ‘ Listening to the Song‘ Performing a Song ‘ Concert Magic Part Volume Balance„ Easy Beat ‘ Concert Magic Song Arrangement Types„ Melody Play „ SkillfulStart by tapping any key with a constant steady beat Press and hold the Concert Magic button‘ Steady Beat ‘ Concert Magic Demo ModesTempo value will be shown in the display ‘ Concert Magic Playback SpeedPress the Tempo button MetronomePress the Tempo button again to stop the metronome Press the Beat buttonVolume level of the metronome can also be adjusted ‘ Adjusting the Metronome VolumePress the Beat button again to stop the metronome Press the Tempo and Beat buttons simultaneouslyPress the Lesson button Selecting a BOOK/SONGListening to and Playing a Song ‘ Adjusting the Tempo of a SongPress the PLAY/STOP button to play the selected song ‘ Exiting the Lesson FunctionPress the REC button while the Lesson button is lit Recording a Song PracticePress the PLAY/STOP button to listen to the recording ‘ Playing Back the RecordingIf no Part is selected PART1 will be selected automatically Recording REC ButtonPress the PLAY/STOP button to stop recording Start to play the piano‘ Recording a Second Part Press the PLAY/STOP button to ﬁ nish recording ‘ Playing Back Recorded Parts Separately Playing Back a SongLED indicator of the selected song will start to ﬂ ash LED indicators will display which songs have been recordedErasing a Song Hold down the REC and PLAY/STOP buttons‘ Exiting a Function Mode ‘ Entering a Function ModeUse the Value buttons to raise or lower the pitch TuningBrief Explanation of Temperaments Temperament‘ KEY Signature of Temperament Use the Value buttons to change the type of temperament‘ Midi Overview Use the Value buttons to change the channel number Midi ChannelChannel number can be set from 1 to Transmit Program Change ON/OFF Offon Use the Value buttons to toggle local control on and off Local Control ON/OFFMULTI-TIMBRAL Mode ON/OFF Use the Value buttons to toggle channel mute on and off Channel MuteUse the Value buttons to change the program change number Sending Program Change NumbersLower Octave Shift can be set from 0 to Lower Octave ShiftUse the Value buttons to toggle lower pedal on and off Lower Pedal ON/OFF‘ Connecting to Other Devices „ Assembly Sequence ‘ Assembly Instructions„ Parts Provided 7 y ‘ Specifications 10 F7 ‘ Midi Exclusive Data FormatFunction Transmit Receive Remarks ‘ Midi Implementation ChartPage Page OW1004E-S0701