Pioneer XRE3138-A Digital, Dts, Analog, PRO Logic, Vir.Sb, Direct, Auto Surr, Att, Sleep, Stereo

04Controls and displays

DIGITAL

Lights when a digital audio signal is detected.

DTS

Lights when a source with DTS encoded audio signals is detected.

2DIGITAL

Lights when a Dolby Digital encoded signal is detected.

ANALOG

Lights when an analog signal is detected.

2

Lights to indicate decoding of a DTS multichannel signal.

3 2 DIGITAL

Lights to indicate decoding of a Dolby Digital multichannel signal.

4 2 PRO LOGIC II

Lights to indicate Pro Logic II decoding (see Listening in surround sound on page 22 for more on this).

5 VIR.SB

Lights during Virtual surround back processing (page 25).

6 DIRECT

Lights when source Stream Direct playback is in use. Stream Direct playback bypasses the tone controls for the most accurate reproduction of a source.

7 AUTO SURR.

Lights when the Auto Surround feature is switched on (see Auto playback on page 22).

8 ATT

Lights when ANALOG ATT is used to attenuate (reduce) the level of the analog input signal.

9 SLEEP

Lights when the receiver is in sleep mode.

10Tuner indicators

/ MONO

Lights when the mono mode is set using the MPX button.

/ STEREO

Lights when a stereo FM broadcast is being received in auto stereo mode.

/ TUNED

Lights when a broadcast is being received.

11Speaker indicator

Shows if the speaker system is on or not.

SPA means the speakers are switched on.

SP means the headphones are connected.

12Character display

13ADV.SURR (Advanced Surround) Lights when one of the Advanced Surround modes has been selected.

14WMA9 Pro

Lights to indicate decoding of a WMA9 Pro signal.

15 MIDNIGHT

Lights during Midnight listening (page 26).

16 D.E.

Lights when Dialog Enhancement is switched on (page 26).

17 LOUDNESS

Lights during Loudness listening (page 26).

18 Master volume level

18

En