Pioneer XRE3138-A manual Connecting up Connecting a TV and DVD player, English Deutsch

Connecting up

Connecting a TV and DVD player

This page shows you how to connect your DVD player and TV to the receiver.

1	Connect a coaxial digital audio output on
your DVD player to the DIGITAL COAX 1
(DVD/LD) input on this receiver.
Use a coaxial digital audio cable for the
connection.1
2	Connect the composite video output and

3TV

DIGITAL

AUDIO OUT	ANALOG AUDIO OUT
OPTICAL			VIDEO IN
	R	L

03

English Deutsch

the stereo analog audio outputs2 on your DVD player to the DVD/LD inputs on this receiver.

Use a standard RCA video cable3 and a stereo RCA phono cable for the connection.

•If your DVD player has multichannel analog outputs, see Connecting the multichannel analog outputs below for how to connect it.

3 Connect the analog audio outputs from

your TV to the TV/SAT inputs on this receiver.

This will allow you to play the sound from the

	IN		CD
	IN		DVR/
OPT			VCR
1
(CD)
ASSIGNABLE			TV/	IN
DIGITAL IN
	IN		SAT
				IN
			DVD
ASSIGNABLE			/LD
	IN		FRONT
DIGITALIN				D V D
COAX				5.1CH
2			PLAY	INPUT
(DVR/VCR)	IN		CD-R	IN
COAX			/TAPE
			/MD
1
(DVD/LD)	OUT		REC
	R	AUDIO	L

4

FM UNBAL

75Ω

AM

LOOP

VIDEO

MONITOR

OUT

SUB

WOOFER

PREOUT

Français Italiano

TV's built-in tuner. Use a stereo RCA phono

cable to do this.

• If your TV has a built-in digital decoder, you

can also connect an optical digital audio

output from your TV to the DIGITAL OPT 1

(CD) input on this receiver. Use an optical

cable for the connection.4

4 Connect the MONITOR OUT video jack on

this receiver to a video input on your TV.

Use a standard RCA video cable to connect to

the composite video jack.5

This receiver

1		2
COAXIAL	R AUDIO L	VIDEO OUT
DIGITAL OUT	ANALOG OUT

DVD player

Nederlands Español

Note

1If your DVD player only has an optical digital output, you can connect it to the optical input on this receiver using an optical cable. When you set up the receiver you'll need to tell the receiver which input you connected the player to (see The Input Assign menu on page 30).

2 This connection will allow you to make analog recordings from your DVD player.

3 If your player also has a component video output, you can connect this too. See Using the component video jacks on page 12. 4 In this case, you'll need to tell the receiver which digital input you connected the TV to (see The Input Assign menu on page 30). 5 See Using the component video jacks on page 12 to use the component video outputs to connect this receiver to your TV.

9

En