GENERAL SPECIFICATIONS
*0dB=0.775Vrms, 0dBV=1VRMS
Maximum Output Level | +26dB (MAIN L/R), +20dB (ALT 3/4, AUX, EFX, CTRL ROOM) | |
(0.5% T.H.D. at 1kHz) | +20dB (INSERT) more than 100mW (HEADPHONES) @ 33Ω | |
T.H.D. | <0.1% @ +14dB 20Hz~20kHz (MAIN L/R, ALT 3/4, AUX SEND, EFX SEND, CTRL ROOM) | |
Frequency Response | 20Hz~20kHz, | |
Hum and Noise (Average, | ||
CTRL ROOM OUT), | ||
20kHz LPF Rs = 150Ω) | ||
fader at nominal level and all channel fader Minimum. | ||
| ||
| 74dB MIC IN to MAIN L/R, 74dB MIC IN to ALT 3/4, 66dB MIC IN to AUX (PRE) | |
| 76dB MIC IN to AUX (POST), 76dB MIC IN to EFX (REV), 80dB MIC IN TO CONTROL ROOM | |
Maximum Voltage Gain | 52.5dB MIC IN to REC L/R, 54dB LINE IN to MAIN L/R, 54dB LINE IN to ALT 3/4 | |
46dB LINE IN to AUX (PRE), 56dB LINE IN to AUX (POST), 56dB LINE IN to EFX (REV), | ||
| ||
| 60dB LINE IN to CONTROL ROOM L/R, 44dB ST IN to MAIN L/R, 44dB ST IN to ALT 3/4 | |
| 16dB AUX RETURN IN to MAIN L/R, 20dB TAPE IN to MAIN L/R | |
Crosstalk (at 1kHz) | ||
Gain Control (mono Input | 44dB Variable | |
channel) | ||
| ||
Gain Control (mono/stereo | 40dB Variable | |
combination Input channel) | ||
| ||
Input Channel Equalization | HIGH: 12kHz shelving, MID: 2.5kHz peaking, LOW: 80Hz shelving * turnover/roll off | |
frequencies: located 3dB below maximum boost/cut | ||
| ||
LED Meters | ||
Channel Indicators | Peak: An indicator for each channel turns on when the | |
below clipping. | ||
| ||
Phantom Power | +48V DC | |
| USA/Canada 120VAC / 60Hz | |
Power Supply | Australia 240VAC / 50Hz | |
| Europe 230VAC / 50Hz | |
Power Consumption | 36W | |
Weight | 3.4 kg (7.5 lbs) | |
5.6 kg (12.3 lbs) | ||
| ||
Dimension (W x H x D) | 328 x 90 x 420 mm (12.9 x 3.5 x 16.5 in) | |
436 x 90 x 420 mm (17.2 x 3.5 x 16.5 in) | ||
|
*Specifications and design subject to change without notice for improvements.
23