Roland FR-5, FR-7 owner manual System parameters, Name, Master Bar Recall, Icon

9.7 Name

This function allows you to name the selected Set (8 char- acters). It would be a good idea to use the name of the instru- ment you “built” using the TRE-

BLE, BASS, FREE BASS, etc., group parameters – or the name of the Song you wish to use this Set for.

(1)Select the character position (indicated by a dark square) by pressing [UP] (previous character), [DOWN] (next character) or the [DATA÷ENTER] knob (next character).

(2)Turn the [DATA÷ENTER] knob to select the desired character.

•Press [UP] and [DOWN] simultaneously to erase the currently selected character (it will become a space). Example: To replace the period (“.”) in “Fr.Folk” with a space (“Fr Folk”), position the cursor on the “.” and simultaneously press [UP]/[DOWN].

•To insert a space before the currently selected char- acter and push all subsequent characters one posi- tion to the right, select the character that should fol- low the space, then press and hold [UP]. Example: To insert a space after the “.” in “Fr.Folk” (creating the name “Fr. Folk”), position the cursor on the second “F”

and hold down [UP] for a while.

Note: If the name already contains 8 characters (“Bandoneo”),

the last character is erased (example: “Band one”).

V-Accordion r

9.7 Name

•To delete the character indicated by the cursor and move subsequent characters one position to the left, select it (example: “Fr.Folk”) and press and hold [DOWN] (“FrFolk”).

9.8 Master Bar Recall

This parameter allows you to choose the Treble register (1~

14)that can be activated by pressing the Master bar. Note that this is only possible while

the Treble section is in Solo mode (page 26) or while the Orchestra part is set to “CANCEL”.

In all other cases (Dual, High, Low modes), the Master bar is indeed used to mute the Orchestra part. And in Solo mode, the first press allows you to return from the Orchestra (if it’s on) to the Treble section.

Note: If you also take advantage of the Treble register’s “Link” functions (see p. 46), this “Recall” parameter actually allows you to reconfigure your entire FR-7/FR-5 simply by pressing the Mas- ter bar.

9.9 Icon

This parameter allows you to assign an icon to your Set, which is displayed above its name on the Main page. In most cases, you will probably choose

a picture that somehow illustrates the contents of your settings, but that is entirely up to you. The FR-7/FR-5 contains 40 preset icons (stored in its internal memory).

10. SYSTEM parameters

The SYSTEM group contains parameters that are related to all Sets and all sections: they apply to the FR-7/FR-5 as a whole. See pages 38 and 40 for how to select and adjust the parameters.

Press [UP] and [DOWN] simultaneously to select the value that is indicated as “Default setting”.

Saving your changes

Any changes you make can be saved using the WRITE function.

(1)Press and hold the [MENU÷WRITE] button until the following page appears:

(3)Press the [DATA÷ENTER] knob to confirm your selection.

(2)Rotate the [DATA÷ENTER] knob (or use the [UP]/ [DOWN] buttons) to select “Global”.

Note: The GLOBAL page shows all parameters that are saved to the Global memory (there is only one such memory).

(4)Press the [MENU÷WRITE] button to save your changes. The display briefly shows a confirmation:

Note: If you don’t save the edited Global settings, they will be used until you switch off the FR-7/FR-5 (or change the settings again).

67