Aviom A-16CS, A-16R manual System Setup, AC Power Connection, System Interconnections

Page 27

System Setup

Start with all devices turned off. When all power and audio connections have been made, you can then power up all the components in your system.

AC Power Connection

The component parts of your Personal Monitor Mixing System use separate external power supplies.

•Connect the power supply to the 18-24 VDC Power jack on the rear of the analog input module (does not apply when using the Yamaha-compatible Y1 card).

•Plug the power supply into an available AC power outlet.

•Connect the power supply to the A-16R Personal Mixer unit.

•Plug the power supply into an available AC power outlet.

The Personal Monitor System will be in its “on” state as long as it is plugged into a working electrical outlet.

No on/off power switches are included. If you would like to control the power state of your units, simply connect the power supplies to a power strip with an on/off switch. Use that as a system power switch.

Note: The A-16CS gets its power from the A-16R when the A-Control jacks are connected via a Cat-5 cable. No power supply is required.

System Interconnections

A single Category 5 cable is required to connect each A-Net compatible device in your system.

Connect a Category 5 cable from the front panel A-Net jack on the Aviom A-Net input module (AN-16/i, AN-16/i-M, A-16T, or Y1 card) to the A-Net In jack on the first Personal Mixer.

Connect additional A-16, A-16II or A-16R Personal Mixers with a single Category 5 cable from the A-Net Out jack on the first Mixer to the A-Net In jack on the next Personal Mixer. (Repeat this process for

17

Image 27

Contents User Guide 16R Personal Mixer 16CS Control SurfaceAviom, Inc Page Warranty Information Read this First Aviom, Inc. Limited Warranty Table of Contents Midi I/O Table of ContentsMidi Page Welcome FeaturesButton Presses Optional Remote ControlUsing Personal Mixers Conventions Used in this DocumentMaster Volume Control 16R Components left side 16R Front Panel16R Components right side Audio Connections 16R Rear Panel16R Midi and Data Connections Left Side 16CS Components16CS Right Side AC Line Conditioning Package ContentsInstalling the A-16R in a Rack Channel LabelsMixer Label Strip What is Category 5? Cables Used in the Aviom SystemCategory 6 Cables Cable Lengths Up to 500 feet of Cat-5 cable can be used to connectInfinite number A-Net components About A-Net Power Supply Polarity Power SuppliesCleaning Maintenance System Setup AC Power ConnectionSystem Interconnections Audio Connections Inputs Audio Connections OutputsLabeling the Channels Powering Up Basic NavigationPreparing to Make a Mix Set the Channel Volume MixingSet the Pan Location What Gets Saved Saving Your New PresetInformation Not Saved With a Preset Series Connection Parallel A-Net routing using an A-16D A-Net DistributorSystem Navigation Net Connection Options16D Pro MixingOperational Modes A-16R Personal MixerTone Controls Global Controls the Master SectionButton Behaviors Master VolumeMaking Changes to Channel Settings Before You Start Editing Volume and Pan Control Pan and Volume ControlsPan LEDs Linking Channels Spread ControlSpread turns this Into this, for example Held Solo ModeSolo Modes Single-Channel SoloMuting a Channel Creating Groups Creating Additional Groups Changing Channel Volumes Within a Group Making Changes to a GroupRemoving Channels From a Group Muting Groups Net Connectors DC Power InputAudio Outputs Mono Operation Stereo OperationBalanced Inserts Mix Signal FlowControl Net In and Out Midi I/OAviom A-16R and A-16CS User Guide Overview A-16CS Front PanelGlobal Controls Master Volume Button Behaviors Changing Channel Settings Channel Volume and Pan ControlAll Volumes Zero Muting a Channel Saving a Mix From the A-16CS Recalling a Preset From the A-16CSA-16CS Rear Panel Display the Current Preset NumberFootswitch Jack Midi Jacks MidiMidi Thru 16R Midi Base ChannelMidi Midi OutMidi Automation Midi Data StorageSave One Mix Preset via Midi Saving PresetsSaving All Mix Presets via Midi Loading . via Midi Loading One Preset via MidiExit Midi Mode Loading an All Preset File via MidiPage Problem Can’t hear a Channel that is part of a Group TroubleshootingProblem No audio from the Personal Mixer outputs Problem Can’t change PresetsProblem The A-Net LED is on, but there is no sound Problem In Group mode, can’t select a new Channel Problem Don’t know if a Preset was savedSpecifications 16R Personal Mixer16CS Control Surface Midi Implementation Chart Version 1.00 for Aviom A-16R Midi System Exclusive ImplementationMidi System Exclusive Packet Head Message Data Format Midi All Presets Message Type = 00H Midi Current Preset Message Type = 01H Presetsmsg 1111 F7H End of Exclusive 0111 Valid preset Range Midi Current Preset Detail 1111 F7H End of Exclusive 0111 Index SymbolsIndex LAN Muting a Channel 33 Program Change Muting Groups XLR Aviom Warranty Registration