Aviom A-16CS, A-16R manual Muting a Channel

Page 43

To use Held Solo Mode:

•Press and hold the SOLO button.

•While holding down the SOLO button, press and then release any Channel button.

•You can now release the SOLO button. (If you release the SOLO button before releasing the Channel button, Held Solo Mode will not be engaged.)

•The Channel that you pressed is now soloed, and the Solo LED is flashing.

•To solo another Channel, press any Channel button.

•To exit Held Solo Mode, press the SOLO button again.

You can also exit Held Solo Mode by pressing the RECALL, GROUP, or MUTE buttons.

Remember that the system can only enter Held Solo Mode from the normal Mix Mode. If you currently have a Channel temporarily soloed (the Solo LED is lit solid), you must exit the temporary Solo Mode (by hitting another Channel button or the SOLO button) before you can enter Held Solo Mode.

Note: The status of Solo Mode is not saved with a Preset.

Muting a Channel

While creating a mix, any Channel or combination of Channels can be muted. Unlike the Solo Mode, the changes you make with the MUTE button can be saved as part of a Preset.

To mute a Channel:

•Select the Channel first

•Press the MUTE button

•The yellow LED in the Channel button lights

To unmute a Channel:

•Select a muted Channel

•Press the MUTE button

•The yellow LED in the Channel button will go out

Additional Channels can be muted or unmuted by following the same procedure—first select the Channel, then press the MUTE button.

33

Image 43

Contents User Guide 16R Personal Mixer 16CS Control SurfaceAviom, Inc Page Warranty Information Read this First Aviom, Inc. Limited Warranty Table of Contents Midi I/O Table of ContentsMidi Page Welcome FeaturesButton Presses Optional Remote ControlUsing Personal Mixers Conventions Used in this DocumentMaster Volume Control 16R Components left side 16R Front Panel16R Components right side Audio Connections 16R Rear Panel16R Midi and Data Connections Left Side 16CS Components16CS Right Side AC Line Conditioning Package ContentsChannel Labels Installing the A-16R in a RackMixer Label Strip Cables Used in the Aviom System What is Category 5?Category 6 Cables Up to 500 feet of Cat-5 cable can be used to connect Cable LengthsInfinite number A-Net components About A-Net Power Supply Polarity Power SuppliesCleaning Maintenance AC Power Connection System SetupSystem Interconnections Audio Connections Outputs Audio Connections InputsLabeling the Channels Basic Navigation Powering UpPreparing to Make a Mix Mixing Set the Channel VolumeSet the Pan Location What Gets Saved Saving Your New PresetInformation Not Saved With a Preset Series Connection Parallel A-Net routing using an A-16D A-Net DistributorSystem Navigation Net Connection Options16D Pro MixingOperational Modes A-16R Personal MixerTone Controls Global Controls the Master SectionButton Behaviors Master VolumeMaking Changes to Channel Settings Before You Start Editing Pan and Volume Controls Volume and Pan ControlPan LEDs Spread Control Linking ChannelsSpread turns this Into this, for example Held Solo ModeSolo Modes Single-Channel SoloMuting a Channel Creating Groups Creating Additional Groups Making Changes to a Group Changing Channel Volumes Within a GroupRemoving Channels From a Group Muting Groups DC Power Input Net ConnectorsAudio Outputs Mono Operation Stereo OperationBalanced Inserts Mix Signal FlowControl Net In and Out Midi I/OAviom A-16R and A-16CS User Guide A-16CS Front Panel OverviewGlobal Controls Master Volume Button Behaviors Channel Volume and Pan Control Changing Channel SettingsAll Volumes Zero Muting a Channel Saving a Mix From the A-16CS Recalling a Preset From the A-16CSA-16CS Rear Panel Display the Current Preset NumberFootswitch Jack Midi Jacks MidiMidi Thru 16R Midi Base ChannelMidi Midi OutMidi Automation Midi Data StorageSave One Mix Preset via Midi Saving PresetsSaving All Mix Presets via Midi Loading . via Midi Loading One Preset via MidiExit Midi Mode Loading an All Preset File via MidiPage Problem Can’t hear a Channel that is part of a Group TroubleshootingProblem No audio from the Personal Mixer outputs Problem Can’t change PresetsProblem The A-Net LED is on, but there is no sound Problem In Group mode, can’t select a new Channel Problem Don’t know if a Preset was saved16R Personal Mixer Specifications16CS Control Surface Midi Implementation Chart Version 1.00 for Aviom A-16R Midi System Exclusive ImplementationMidi System Exclusive Packet Head Message Data Format Midi All Presets Message Type = 00H Midi Current Preset Message Type = 01H Presetsmsg 1111 F7H End of Exclusive 0111 Valid preset Range Midi Current Preset Detail 1111 F7H End of Exclusive 0111 Index SymbolsIndex LAN Muting a Channel 33 Program Change Muting Groups XLR Aviom Warranty Registration