Aviom A-16CS, A-16R manual Button Behaviors

Page 57

Button Behaviors

There are various combinations of lit and unlit buttons on the A-16CS Control Surface. They are the same as those found on the A-16R. Here is an overview:

Channel buttons have two LEDs, an upper and lower. The upper button is red and indicates that the Channel is selected. The lower button is yellow; it indicates that the Channel is muted. Channel buttons will light solid or flash.

The RECALL button has one red LED. It flashes when the RECALL button is pressed, indicating that you can now select a Preset by touching any numbered button.

There is one LED in the GROUP button. When the GROUP button is pressed, the LED flashes. This indicates that you can now build or edit a Group.

The RECALL and GROUP buttons will both flash when held down simultaneously. This is the Save Mode, as indicated by the connecting graphic above the two buttons on the front panel.

When a Preset is saved, all sixteen Channel buttons will flash briefly to confirm the Preset save operation.

The SOLO button has one LED. It will light when pressed, indicating that the selected Channel or Group is now being auditioned with all other Channels being muted.

The MUTE button has no LED in it. Pressing the MUTE button with a Channel selected will cause the Channel’s lower (yellow) LED to light.

There is also one special button combination, the RECALL button followed by the MUTE button. When used together this combination serves a twofold function:

If there is a sudden change in the audio volume coming through the monitor system, this button combination silences all audio channels instantly.

When starting from scratch to create a mix, use this function to set all sixteen channels to zero volume and all pans to the center settings.

47

Image 57
Contents User Guide 16R Personal Mixer 16CS Control SurfaceAviom, Inc Page Warranty Information Read this First Aviom, Inc. Limited Warranty Table of Contents Midi I/O Table of ContentsMidi Page Welcome FeaturesUsing Personal Mixers Optional Remote ControlConventions Used in this Document Button PressesMaster Volume Control 16R Components left side 16R Front Panel16R Components right side Audio Connections 16R Rear Panel16R Midi and Data Connections Left Side 16CS Components16CS Right Side AC Line Conditioning Package ContentsInstalling the A-16R in a Rack Channel LabelsMixer Label Strip What is Category 5? Cables Used in the Aviom SystemCategory 6 Cables Cable Lengths Up to 500 feet of Cat-5 cable can be used to connectInfinite number A-Net components About A-Net Power Supply Polarity Power SuppliesCleaning Maintenance System Setup AC Power ConnectionSystem Interconnections Audio Connections Inputs Audio Connections OutputsLabeling the Channels Powering Up Basic NavigationPreparing to Make a Mix Set the Channel Volume MixingSet the Pan Location What Gets Saved Saving Your New PresetInformation Not Saved With a Preset System Navigation Parallel A-Net routing using an A-16D A-Net DistributorNet Connection Options Series Connection16D Pro MixingOperational Modes A-16R Personal MixerTone Controls Global Controls the Master SectionButton Behaviors Master VolumeMaking Changes to Channel Settings Before You Start Editing Volume and Pan Control Pan and Volume ControlsPan LEDs Linking Channels Spread ControlSpread turns this Solo Modes Held Solo ModeSingle-Channel Solo Into this, for exampleMuting a Channel Creating Groups Creating Additional Groups Changing Channel Volumes Within a Group Making Changes to a GroupRemoving Channels From a Group Muting Groups Net Connectors DC Power InputAudio Outputs Mono Operation Stereo OperationBalanced Inserts Mix Signal FlowControl Net In and Out Midi I/OAviom A-16R and A-16CS User Guide Overview A-16CS Front PanelGlobal Controls Master Volume Button Behaviors Changing Channel Settings Channel Volume and Pan ControlAll Volumes Zero Muting a Channel Saving a Mix From the A-16CS Recalling a Preset From the A-16CSA-16CS Rear Panel Display the Current Preset NumberFootswitch Jack Midi Jacks MidiMidi 16R Midi Base ChannelMidi Out Midi ThruMidi Automation Midi Data StorageSave One Mix Preset via Midi Saving PresetsSaving All Mix Presets via Midi Loading . via Midi Loading One Preset via MidiExit Midi Mode Loading an All Preset File via MidiPage Problem No audio from the Personal Mixer outputs TroubleshootingProblem Can’t change Presets Problem Can’t hear a Channel that is part of a GroupProblem The A-Net LED is on, but there is no sound Problem In Group mode, can’t select a new Channel Problem Don’t know if a Preset was savedSpecifications 16R Personal Mixer16CS Control Surface Midi Implementation Chart Version 1.00 for Aviom A-16R Midi System Exclusive ImplementationMidi System Exclusive Packet Head Message Data Format Midi All Presets Message Type = 00H Midi Current Preset Message Type = 01H Presetsmsg 1111 F7H End of Exclusive 0111 Valid preset Range Midi Current Preset Detail 1111 F7H End of Exclusive 0111 Index SymbolsIndex LAN Muting a Channel 33 Program Change Muting Groups XLR Aviom Warranty Registration