•Panning for mono channels
•Spread for stereo channels
•Mute status
•Solo status
•Grouping
In addition to these changes, you can use Solo Mode to audition your edits to a Channel while all other Channels are temporarily silenced. Groups can also be soloed.
Before You Start Editing
Remote
Midi Off
Local
Midi On
Phones
When using the A-16R, it is important to note that only one device can control the mix settings of the A-16R at a time. This is true even if you do not have an optional A-16CS Control Surface connected. Some important points to keep in mind:
•Set the Remote/Local switch to the LOCAL position to use the front panel of the A-16R for editing and save/recall of Presets.
•Set the Remote/Local switch to the REMOTE position to use an A-16CS to remotely control the A-16R. Editing mixes and save/recall of your Presets only works from the A-16CS in this case.
•Only the Mix In knob on the A-16R rack will function when the Remote/Local switch is set to the REMOTE position.
When using an A-16CS with an A-16R the settings of the Bass, Treble, and Master Volume knobs are independent. Switching mix control between the two devices can cause unexpected changes in volume and EQ if the settings of the knobs are not similar.
29