Aviom A-16R, A-16CS manual Control

Page 52

Aviom A-16R and A-16CS User Guide

Any analog line-level signal can be connected to the Mix In jacks. Some ideas for connected signals to the Mix In jacks include:

•Click Tracks

•Talkback or intercom communications

•Pre-recorded tracks

•Cascading other A-Net mixer outputs

•CD players or other recorded audio devices

The Mix In jacks can accept a wide variety of signal levels without distortion. The connections are balanced TRS jacks.

A-Control

A-Control is a special protocol developed to allow the A-16R to be controlled by a remote device. Only the optional A-16CS Control Surface should be connected to the A-Control jack. The connection uses a standard Cat-5 jack and cable.

With an A-16CS connected to the A-Control jack, the A-16R will respond to mix edits and Preset save/recall commands from as far away as 200 feet (60 meters). Note that the LOCAL/REMOTE switch on the front panel of the A-16R must be in the Remote position in order for the A-16CS to be recognized.

42

Image 52

Contents 16R Personal Mixer 16CS Control Surface User GuideAviom, Inc Page Warranty Information Read this First Aviom, Inc. Limited Warranty Table of Contents Table of Contents Midi I/OMidi Page Features WelcomeOptional Remote Control Using Personal MixersConventions Used in this Document Button PressesMaster Volume Control 16R Front Panel 16R Components left side16R Components right side 16R Rear Panel Audio Connections16R Midi and Data Connections 16CS Components Left Side16CS Right Side Package Contents AC Line ConditioningChannel Labels Installing the A-16R in a RackMixer Label Strip Cables Used in the Aviom System What is Category 5?Category 6 Cables Up to 500 feet of Cat-5 cable can be used to connect Cable LengthsInfinite number A-Net components About A-Net Power Supplies Power Supply PolarityCleaning Maintenance AC Power Connection System SetupSystem Interconnections Audio Connections Outputs Audio Connections InputsLabeling the Channels Basic Navigation Powering UpPreparing to Make a Mix Mixing Set the Channel VolumeSet the Pan Location Saving Your New Preset What Gets SavedInformation Not Saved With a Preset Parallel A-Net routing using an A-16D A-Net Distributor System NavigationNet Connection Options Series ConnectionMixing 16D ProA-16R Personal Mixer Operational ModesGlobal Controls the Master Section Tone ControlsMaster Volume Button BehaviorsMaking Changes to Channel Settings Before You Start Editing Pan and Volume Controls Volume and Pan ControlPan LEDs Spread Control Linking ChannelsSpread turns this Held Solo Mode Solo ModesSingle-Channel Solo Into this, for exampleMuting a Channel Creating Groups Creating Additional Groups Making Changes to a Group Changing Channel Volumes Within a GroupRemoving Channels From a Group Muting Groups DC Power Input Net ConnectorsAudio Outputs Stereo Operation Mono OperationBalanced Inserts Signal Flow MixControl Midi I/O Net In and OutAviom A-16R and A-16CS User Guide A-16CS Front Panel OverviewGlobal Controls Master Volume Button Behaviors Channel Volume and Pan Control Changing Channel SettingsAll Volumes Zero Muting a Channel Recalling a Preset From the A-16CS Saving a Mix From the A-16CSDisplay the Current Preset Number A-16CS Rear PanelFootswitch Jack Midi Midi Jacks16R Midi Base Channel MidiMidi Out Midi ThruMidi Automation Data Storage MidiSaving Presets Save One Mix Preset via MidiSaving All Mix Presets via Midi Loading One Preset via Midi Loading . via MidiLoading an All Preset File via Midi Exit Midi ModePage Troubleshooting Problem No audio from the Personal Mixer outputsProblem Can’t change Presets Problem Can’t hear a Channel that is part of a GroupProblem The A-Net LED is on, but there is no sound Problem Don’t know if a Preset was saved Problem In Group mode, can’t select a new Channel16R Personal Mixer Specifications16CS Control Surface Midi Implementation Chart Midi System Exclusive Implementation Version 1.00 for Aviom A-16RMidi System Exclusive Packet Head Message Data Format Midi All Presets Message Type = 00H Midi Current Preset Message Type = 01H Presetsmsg 1111 F7H End of Exclusive 0111 Valid preset Range Midi Current Preset Detail 1111 F7H End of Exclusive 0111 Symbols IndexIndex LAN Muting a Channel 33 Program Change Muting Groups XLR Aviom Warranty Registration