Aviom A-16R and A-16CS User Guide
A-16CS Remote Control Surface Features:
•Controls all front-panel functions on the A-16R
•Sixteen Channel select buttons with dual LEDs
•Dedicated Recall, Group, Solo, and Mute buttons
•Pan/Spread control with LED readout
•Footswitch jack for Preset Up/Down control
•Can be mounted on the optional MT-1 mic stand mount
System Options:
•A-16D A-Net Distributor
•A-16D Pro A-Net Distributor
•MT-1 mic stand mount for the A-16CS Control Surface
Conventions Used in this Document
Button Presses
When indicating a button on the front panel of the A-16R Personal Mixer or A-16CS, a special typeface is used. For example, “when selecting a Preset, press the RECALL button, followed by a numbered button”.
Using Personal Mixers
It is possible to create a personal monitor system using any combination of Aviom Personal Mixer products. In some cases the information in this document can refer to either the table-top version of the Personal Mixer, or the rack-mounted A-16R version.
When using the A-16R Personal Mixer with the optional A-16CS Control Surface, many of the same buttons and functions are available.
When referring to the use of the mixers in a Personal Monitor Mixing System in general, the terms A-16 Mixer or Personal Mixer are used to describe a case where a standard A-16 or A-16II Personal Mixer, the A-16CS remote Control Surface, or a rack mounted A-16R Personal Mixer can be used.
Optional Remote Control
When using the A-16R in a monitor system, the A-16CS Control Surface can be used as an optional remote control device. This enables the A-16R to be placed at the rear of the stage or in another remote location while at the same time providing the user with complete