Aviom A-16R, A-16CS manual Mixing, 16D Pro

Page 34

Aviom A-16R and A-16CS User Guide

A-16 D or

A-16D Pro

Personal

Mixer

Personal

Mixer

Personal

Mixer

Personal

Mixer

Personal

Mixer

A-Net Out from the A-16D or A-16D Pro is connected to each Personal Mixer’s A-Net In. Removing one Personal Mixer from the system has no effect on other Personal Mixers being used.

Mixing

The process of creating a monitor mix using Aviom’s Monitor Mixing System is similar to the process used to create a front-of-house mix. The Personal Mixer interface makes it easy to jump right in and create your first mix within minutes of connecting the system for the first time.

Mixing involves setting pan, volume, and mute status for each Channel, and then saving this setup as a mix Preset so that you can recall your mix later.

The user interface of the A-16R and optional A-16CS are quite simple to understand. As with many digital mixers, the A-16R Personal Mixer has many Channels, but only one set of controls that are shared by all the Channels. A Channel is selected by pressing one of the numbered Channel buttons on the Mixer’s front surface. When a Channel is selected, the red LED in the Channel’s button will light to indicate that it has been selected and is ready to be edited.

The procedure to edit a Channel involves only two steps:

Select the Channel you want to change.

Edit the volume, panning, or mute status

That’s it. Each Channel can be edited by using the same simple steps.

Note: Remember to save your new mix as a Preset to a memory location before turning the system off. Current unsaved edits to mix settings are not retained when the A-16R is powered off.

24

Image 34
Contents 16R Personal Mixer 16CS Control Surface User GuideAviom, Inc Page Warranty Information Read this First Aviom, Inc. Limited Warranty Table of Contents Table of Contents Midi I/OMidi Page Features WelcomeConventions Used in this Document Optional Remote ControlUsing Personal Mixers Button PressesMaster Volume Control 16R Front Panel 16R Components left side16R Components right side 16R Rear Panel Audio Connections16R Midi and Data Connections 16CS Components Left Side16CS Right Side Package Contents AC Line ConditioningChannel Labels Installing the A-16R in a RackMixer Label Strip Cables Used in the Aviom System What is Category 5?Category 6 Cables Up to 500 feet of Cat-5 cable can be used to connect Cable LengthsInfinite number A-Net components About A-Net Power Supplies Power Supply PolarityCleaning Maintenance AC Power Connection System SetupSystem Interconnections Audio Connections Outputs Audio Connections InputsLabeling the Channels Basic Navigation Powering UpPreparing to Make a Mix Mixing Set the Channel VolumeSet the Pan Location Saving Your New Preset What Gets SavedInformation Not Saved With a Preset Net Connection Options Parallel A-Net routing using an A-16D A-Net DistributorSystem Navigation Series ConnectionMixing 16D ProA-16R Personal Mixer Operational ModesGlobal Controls the Master Section Tone ControlsMaster Volume Button BehaviorsMaking Changes to Channel Settings Before You Start Editing Pan and Volume Controls Volume and Pan ControlPan LEDs Spread Control Linking ChannelsSpread turns this Single-Channel Solo Held Solo ModeSolo Modes Into this, for exampleMuting a Channel Creating Groups Creating Additional Groups Making Changes to a Group Changing Channel Volumes Within a GroupRemoving Channels From a Group Muting Groups DC Power Input Net ConnectorsAudio Outputs Stereo Operation Mono OperationBalanced Inserts Signal Flow MixControl Midi I/O Net In and OutAviom A-16R and A-16CS User Guide A-16CS Front Panel OverviewGlobal Controls Master Volume Button Behaviors Channel Volume and Pan Control Changing Channel SettingsAll Volumes Zero Muting a Channel Recalling a Preset From the A-16CS Saving a Mix From the A-16CSDisplay the Current Preset Number A-16CS Rear PanelFootswitch Jack Midi Midi JacksMidi Out 16R Midi Base ChannelMidi Midi ThruMidi Automation Data Storage MidiSaving Presets Save One Mix Preset via MidiSaving All Mix Presets via Midi Loading One Preset via Midi Loading . via MidiLoading an All Preset File via Midi Exit Midi ModePage Problem Can’t change Presets TroubleshootingProblem No audio from the Personal Mixer outputs Problem Can’t hear a Channel that is part of a GroupProblem The A-Net LED is on, but there is no sound Problem Don’t know if a Preset was saved Problem In Group mode, can’t select a new Channel16R Personal Mixer Specifications16CS Control Surface Midi Implementation Chart Midi System Exclusive Implementation Version 1.00 for Aviom A-16RMidi System Exclusive Packet Head Message Data Format Midi All Presets Message Type = 00H Midi Current Preset Message Type = 01H Presetsmsg 1111 F7H End of Exclusive 0111 Valid preset Range Midi Current Preset Detail 1111 F7H End of Exclusive 0111 Symbols IndexIndex LAN Muting a Channel 33 Program Change Muting Groups XLR Aviom Warranty Registration