Aviom A-16R and A-16CS User Guide
A-16R Rear Panel
On the rear of the A-16R Personal Mixer you will find the A-Net connectors, the power supply input, insert points, auxiliary mix input jacks, MIDI I/O, the A-Control connector, and the line-level audio outputs.
A-Net Connectors
There are two A-Net connectors on the rear of the Personal Mixer.
The A-Net In jack accepts
•the A-Net signal coming from the A-Net input module (AN-16/i, Y1 card, AN-16/i-M, A-16T Transmitter, etc.) if the Personal Mixer is the first Personal Mixer in the system, or
•the A-Net signal coming from the Out jack of a Personal Mixer, or
•the A-Net signal coming from the Out jack of a an A-Net output module such as the AN-16/o, or
•the A-Net Out signal from an A-16D or A-16D Pro A-Net Distributor
The A-Net Out jack is used to connect another A-Net device. This will send the same sixteen audio channels being transmitted by the A-Net input module to the next A-Net device so that another unique monitor mix can be created. An unlimited number of A-Net devices can be connected in series using this method. Any A-Net device, including A-Net Distributors can be connected.
DC Power Input
Connect the DC power supply to the jack on the rear of the A-16R Personal Mixer. Use only power supplies designed for your Aviom products.
When using the optional A-16D or A-16D Pro A-Net Distribution products, power can be supplied to the A-16R from a remote location eliminating the need for the local DC power supply. Consult the Distributor products’s documentation for additional setup information.
Audio Outputs
The audio outputs on the rear of the A-16R Personal Mixer can be
