Yamaha CLP-F01 owner manual Precautions

Page 3

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

Power supply/Power cord

•Only use the voltage specified as correct for the instrument. The required voltage is printed on the name plate of the instrument.

•Check the electric plug periodically and remove any dirt or dust which may have accumulated on it.

•Use only the supplied power cord/plug.

•Do not place the power cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it.

Water warning

•Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings.

•Never insert or remove an electric plug with wet hands.

Fire warning

•Do not put burning items, such as candles, on the unit. A burning item may fall over and cause a fire.

ENGLISH

 

 

 

 

 

 

 

 

 

If you notice any abnormality

 

Do not open

 

• If the power cord or plug becomes frayed or damaged, or if there is a

• Do not open the instrument or attempt to disassemble the internal parts or

 

sudden loss of sound during use of the instrument, or if any unusual

 

modify them in any way. The instrument contains no user-serviceable

 

 

 

smells or smoke should appear to be caused by it, immediately turn off the

 

parts. If it should appear to be malfunctioning, discontinue use

 

 

 

power switch, disconnect the electric plug from the outlet, and have the

 

immediately and have it inspected by qualified Yamaha service personnel.

 

 

 

instrument inspected by qualified Yamaha service personnel.

 

 

 

 

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following:

Power supply/Power cord

 

Location

•When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord. Pulling by the cord can damage it.

•Remove the electric plug from the outlet when the instrument is not to be used for extended periods of time, or during electrical storms.

•Do not connect the instrument to an electrical outlet using a multiple- connector. Doing so can result in lower sound quality, or possibly cause overheating in the outlet.

Assembly

•Read carefully the attached documentation explaining the assembly process. Failure to assemble the instrument in the proper sequence might result in damage to the instrument or even injury.

•Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components.

•Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise.

•Do not place the instrument in an unstable position where it might accidentally fall over.

•Before moving the instrument, remove all connected cables.

(1)B-7 1/2

CLP-F01PRECAUTIONS 3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents CLP-F01 Special Message Section Precautions Connections Appendix TrademarksIntroduction ReferenceTable of Contents Application Index Transporting AccessoriesTuning Bench may be included or optional, depending on your localeTranspose FeaturesTo close the key cover Before Using the ClavinovaKey Cover To open the key coverMusic Rest To position the music rest for useTo replace the music rest Power indicator Turning the Power OnConnect the power cord Turn the power onSetting the Volume Using Headphones optionUsing the Speaker Switch Memo Panel Controls and Terminals Clavinova’s various functionsConnectors Panel Controls and TerminalsTop panel Display Listening to the Demonstration Tunes Stop playback Listening to 50 Piano Preset SongsEngage Preset Song mode Play any of the 50 preset songsStart playback and playing Exit from Preset Song modeHow to use the practice functions Turn off the playback part you wish to practiceLeft Pedal Start/Stop Will appear on the dis Repeat for 50 Preset SongsDamper Right Pedal Using the PedalsSelecting & Playing Voices Selecting VoicesNormal setting Sostenuto Center PedalSoft Left Pedal Depth 0 no effect Depth 20 maximum effect depth Adjusting Reverb DepthAdjusting Effect Depth Depth 0 no effectTouch Sensitivity Touch Changing the volume when Fixed is selectedTranspose Transposition TransposeCombining Two Voices Dual mode Engage Dual modeExit Dual mode and return to normal play mode Split Engage Split modeSelect a voice for the left hand Exit Split mode and return to normal play modePress the Split button again so that its indicator goes out Select a voice for the right handStart the metronome Using the MetronomeAdjusting the tempo Adjusting the time signatureRecording vs. Saving Make all the initial settingsRecording Your Performance Select a song for recordingStop recording Engage Record modeSelect the record track Start recordingRecording to Track Re-recording TrackIndividual Tracks Voice selectionEntire Song You can change the following initial settings Change the settings via the panel controlsPress the REC button to exit Record mode Select the desired song Midi connectorsPlaying Back Recorded Songs Playing Back a SongSynchro Useful Playback FunctionsTurning track playback on and off Assigning the START/STOP function to the left pedalParameter List Detailed Settings FunctionUse the -/NO +/YES buttons Basic Procedure in Function ModeEngage Function mode Select a functionDo the following when you finish using the func- tion Operation Example 1 F1. Fine tuning of the pitchOperation Example 2 F3.1 Dual Balance Hz Hertz Setting rangeAbout Each Function Display ValueMeanTone EqualPureMajor/PureMinor PythagoreanVoice 1 Octave Shift Voice 2 Octave Shift ResetSub-mode Dual Balance Dual DetuneRight Voice Effect Depth Left Voice Effect Depth Sub-mode Split PointSplit Balance Right Voice Octave Shift Left Voice Octave ShiftSustain Sample Depth Sub-mode Left Pedal ModeKeyoff Sample Volume Soft Pedal Effect DepthSub-mode Midi Transmit Channel Selection F6. Metronome VolumeProgram Change ON/OFF Setting range ON/OFF Normal setting onMidi Receive Channel Selection Local Control ON/OFFBulk Data Dump ProcedureMidi Transmit Transpose Panel/Status TransmitDescription of sub-modes Voice Sub-mode Voice Midi Tuning OthersFactory Preset Recall Setting range ON/OFF Normal setting OFF all groupsMidi cables Midi connectorsTo Host connector About MidiConnections ConnectorsAUX in L/L+R jack or AUX OUT L/L+R jack AUX in R, L/L+R jacksOn the power to the computer first, then to the Clavinova Connecting a Personal ComputerConnection Type of serial cables and connection pin assignmentsClavinova Host Select switch setting Set the Clavinova Host Select switch to MidiConnection Computer Problem Possible Cause and Solution TroubleshootingKeyboard Stand Assembly Removing the panelsInsert the rear panel center Attach the fall-prevention bracket Install the rear panels left and rightVoltage Selector Fasten the rear panels securelyCheck the connection After completing the assembly, please check the followingReview the assembly procedure and correct any errors Move the Clavinova to an appropriate locationVoice Name Stereo Touch Dynamic Key-Off Voice Descriptions Preset Voice ListWood Bass Voice Name Piano Voice Demo Demo Song ListPiano Voice Demo Description Voice Name Title ComposerIndex Start/Stop playback Practicing a One-Hand Part Using 50 Preset Songs......20Soft Pedal 16, 24 16, 29Appendix Backup Group Function number Default Backup GroupFunction CLP-F01Appendix Panel Data Contents Midi Master VolumePanel Data Transmit Data format F0H 7EH XnH 09H 01H F7H General Midi Mode OnEffect Midi Map Midi Parameter Change table EffectMidi Parameter Change table Multi Part Midi Implementation Chart ON/OFF Memo Memo Please Keep this Manual FCC Information U.S.A North America Clavinova Web site English only Yamaha Manual Library
Top Page Image Contents