Yamaha CLP-F01 owner manual Panel Data Transmit, Panel Data Contents, Midi Master Volume

4. PROGRAM CHANGE

Data format: [CnH] -> [ppH]

CnH = Program event (n = channel number) ppH = Program change number

P.C.#=Program Change number

Voice Name	MSB	LSB	P.C.#
			(1–128)
GRANDPIANO 1	0	122	1
VARIATION	0	123	1
GRANDPIANO 2	0	112	1
VARIATION	0	112	2
GRANDPIANO 3	0	122	2

6.SYSTEM EXCLUSIVE MESSAGES (Yamaha MIDI Format)

Panel Data Transmit

Data format: [F0H] -> [43H] -> [0nH] -> [7CH] -> ... -> [F7H]

F0H, 43H, 0nH, 7CH (n: channel number) 00H, 2DH (data length)

43H, 4CH, 20H, 20H (CL)

43H, 4CH, 50H, 27H, 30H, 34H (CLP’04) 30H, 30H (version x, y)

[PANEL DATA]

[CHECK SUM (1byte)] = 0-(43H+4CH+20H+......+Data end)

F7H

VARIATION	0	122	4
E.PIANO 1	0	122	6
VARIATION	0	122	89
E.PIANO 2	0	122	5
VARIATION	0	123	5
HARPSICHORD	0	122	7
VARIATION	0	123	7
VIBRAPHONE	0	122	12
VARIATION	0	122	13
CHURCH ORGAN	0	123	20
VARIATION	0	122	20
JAZZ ORGAN	0	122	17
VARIATION	0	123	17
STRINGS	0	122	49
VARIATION	0	122	50

•Panel Data Contents

(1)1'st Voice

(2)Dual On/Off

(3)Dual Voice

(4)Dual Balance

(5)Dual Detune

(6)Dual Voice1 Octave

(7)Dual Voice2 Octave

(8)Dual Voice1 Effect Depth

(9)Dual Voice2 Effect Depth

(10)Split On/Off

(11)Split Voice

(12)Split Point

(13)Split Balance

(14)Split Voice1 Octave

(15)Split Voice2 Octave

(16)Split Voice1 Effect Depth

(17)Split Voice2 Effect Depth

(18)Split Dumper Mode

(19)Reverb Type 1

(20)Reverb Type 2

(21)Reverb Depth 1

(22)Reverb Depth 2

(23)Effect Type 1

(24)Effect Type 2

(25)Effect Depth

(26)Variation On/Off

(27)Touch Sensitivity

(28)Fixed Data

(29)Left Pedal

(30)Soft Pedal Depth

(31)Absolute tempo low byte

(32)Absolute tempo high byte

(33)Key-Off Sampling Depth

CHOIR	0	122	53
VARIATION	0	123	53
GUITAR/CLAVI.	0	122	25
VARIATION	0	122	8
WOOD BASS	0	122	33
VARIATION	0	124	33
E.BASS	0	122	34
VARIATION	0	122	36

•If you assign Program Change numbers using numbers 0 through 127, subtract one (1) from a Program change number (P.C. #) listed above. For example, if you wish to change to a Program with the P.C. #1, specify number 0.

•When program change reception is turned OFF in the Func- tion mode, no program change data is transmitted or received. Also, Bank MSB/LSB is not transmitted or received.

5.SYSTEM REALTIME MESSAGES

[rrH]

F8H: Timing clock

FAH: Start

FCH: Stop

FEH: Active sensing

Data	Transmission	Reception
F8H	Transmitted every	Received as 96-clock tempo timing
	96 clocks	when MIDI clock is set to External
		Recorder start
FAH	Recorder start	Not received when the MIDI clock is
		set to Internal.
		Recorder stop
FCH	Recorder stop	Not received when the MIDI clock is
		set to Internal.
		If a signal is not received via MIDI for
		more than 400 milliseconds, the
FEH	Transmitted every	same processing will take place for All
	200 milliseconds	Sound Off, All Notes Off and Reset All
		Controllers as when those signals are
		received.

•Caution: If an error occurs during MIDI reception, the Damper, Sostenuto, and Soft effects for all channels are turned off and an All Note Off occurs.

• Panel data send requests cannot be received.

7.SYSTEM EXCLUSIVE MESSAGES (Universal System Exclusive)

(1) Universal Realtime Message

Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] -> [llH] -> [mmH] -> [F7H]

MIDI Master Volume

•Simultaneously changes the volume of all channels.

•When a MIDI master volume message is received, the volume only has affect on the MIDI receive channel, not the panel master vol-ume.

F0H = Exclusive status 7FH = Universal Realtime 7FH = ID of target device

04H = Sub-ID #1=Device Control Message

01H = Sub-ID #2=Master Volume llH = Volume LSB

mmH = Volume MSB F7H = End of Exclusive

or

F0H = Exclusive status 7FH = Universal Realtime

XnH = When n is received n=0~F, whichever is received. X = don’t care

04H = Sub-ID #1=Device Control Message

01H = Sub-ID #2=Master Volume llH = Volume LSB

mmH = Volume MSB F7H = End of Exclusive

70 CLP-F01 Appendix