Yamaha CLP-F01 owner manual AUX in R, L/L+R jacks, AUX in L/L+R jack or AUX OUT L/L+R jack

Page 53

2AUX IN [R], [L/L+R] jacks

The stereo outputs from another instrument can be connected to these jacks, allowing the sound of an external instrument to be reproduced via the Clavinova’s speakers. Refer to the diagram below and use audio cables to make the connec- tions.

CAUTION

When the Clavinova’s AUX IN jacks are connected to an external device, ﬁrst turn on the power to the external device, then to the Clavinova. Reverse this order when you turn the power off.

Clavinova

phone plug (standard)

R L/L+R

AUX IN

AUX OUT

AUX IN

phone plug

(standard)

Tone Generator

audio cable

3TO HOST jack

This jack allows direct connection to a personal computer. (Refer to “Connecting a personal computer” on page 54 for more information.)

4HOST SELECT switch

This switch should be set according to the type of connected MIDI device or per- sonal computer. (Refer to “Connecting a personal computer” on page 54 for more information.)

5MIDI [IN], [OUT], [THRU] connectors

Use MIDI cables to connect external MIDI devices to these connectors.

Make sure you set the HOST SELECT switch to MIDI when you use these connec- tors.

(Refer to “About MIDI” on page 51 for more information.)

NOTE

The Clavinova’s [MASTER VOLUME] and [BRILLIANCE] control settings affect the input signal from the AUX IN jacks, but the [REVERB] and [EFFECT] settings do not.

NOTE

If you connect the Clavinova to a monaural device, use only the

AUX IN [L/L+R] jack or AUX OUT [L/L+R] jack.

ENGLISH

CLP-F01Connections 53

Image 53

Contents CLP-F01 Special Message Section Precautions Connections Introduction TrademarksReference AppendixTable of Contents Application Index Tuning AccessoriesBench may be included or optional, depending on your locale TransportingTranspose FeaturesKey Cover Before Using the ClavinovaTo open the key cover To close the key coverTo replace the music rest Music RestTo position the music rest for use Connect the power cord Turning the Power OnTurn the power on Power indicatorUsing the Speaker Switch Setting the VolumeUsing Headphones option Memo Panel Controls and Terminals Clavinova’s various functionsTop panel ConnectorsPanel Controls and Terminals Display Listening to the Demonstration Tunes Engage Preset Song mode Listening to 50 Piano Preset SongsPlay any of the 50 preset songs Stop playbackHow to use the practice functions Exit from Preset Song modeTurn off the playback part you wish to practice Start playback and playingLeft Pedal Start/Stop Will appear on the dis Repeat for 50 Preset SongsSelecting & Playing Voices Using the PedalsSelecting Voices Damper Right PedalSoft Left Pedal Normal settingSostenuto Center Pedal Adjusting Effect Depth Adjusting Reverb DepthDepth 0 no effect Depth 0 no effect Depth 20 maximum effect depthTouch Sensitivity Touch Changing the volume when Fixed is selectedTranspose Transposition TransposeExit Dual mode and return to normal play mode Combining Two Voices Dual modeEngage Dual mode Split Engage Split modePress the Split button again so that its indicator goes out Exit Split mode and return to normal play modeSelect a voice for the right hand Select a voice for the left handAdjusting the tempo Using the MetronomeAdjusting the time signature Start the metronomeRecording Your Performance Make all the initial settingsSelect a song for recording Recording vs. SavingSelect the record track Engage Record modeStart recording Stop recordingRecording to Track Re-recording TrackEntire Song Individual TracksVoice selection Press the REC button to exit Record mode You can change the following initial settingsChange the settings via the panel controls Playing Back Recorded Songs Midi connectorsPlaying Back a Song Select the desired songTurning track playback on and off Useful Playback FunctionsAssigning the START/STOP function to the left pedal SynchroParameter List Detailed Settings FunctionEngage Function mode Basic Procedure in Function ModeSelect a function Use the -/NO +/YES buttonsOperation Example 2 F3.1 Dual Balance Do the following when you ﬁnish using the func- tionOperation Example 1 F1. Fine tuning of the pitch About Each Function Setting rangeDisplay Value Hz HertzPureMajor/PureMinor EqualPythagorean MeanToneSub-mode Dual Balance ResetDual Detune Voice 1 Octave Shift Voice 2 Octave ShiftSplit Balance Sub-mode Split PointRight Voice Octave Shift Left Voice Octave Shift Right Voice Effect Depth Left Voice Effect DepthKeyoff Sample Volume Sub-mode Left Pedal ModeSoft Pedal Effect Depth Sustain Sample DepthSub-mode Midi Transmit Channel Selection F6. Metronome VolumeMidi Receive Channel Selection Setting range ON/OFF Normal setting onLocal Control ON/OFF Program Change ON/OFFMidi Transmit Transpose ProcedurePanel/Status Transmit Bulk Data Dump Factory Preset Recall Sub-mode Voice Midi Tuning Others Setting range ON/OFF Normal setting OFF all groups Description of sub-modes VoiceTo Host connector Midi connectorsAbout Midi Midi cablesConnections ConnectorsAUX in L/L+R jack or AUX OUT L/L+R jack AUX in R, L/L+R jacksOn the power to the computer ﬁrst, then to the Clavinova Connecting a Personal ComputerConnection Type of serial cables and connection pin assignmentsConnection Clavinova Host Select switch settingSet the Clavinova Host Select switch to Midi Computer Problem Possible Cause and Solution TroubleshootingInsert the rear panel center Keyboard Stand AssemblyRemoving the panels Voltage Selector Install the rear panels left and rightFasten the rear panels securely Attach the fall-prevention bracketReview the assembly procedure and correct any errors After completing the assembly, please check the followingMove the Clavinova to an appropriate location Check the connectionVoice Name Stereo Touch Dynamic Key-Off Voice Descriptions Preset Voice ListWood Bass Piano Voice Demo Description Demo Song ListVoice Name Title Composer Voice Name Piano Voice DemoIndex Soft Pedal 16, 24 Practicing a One-Hand Part Using 50 Preset Songs......2016, 29 Start/Stop playbackAppendix Function Backup GroupFunction number Default Backup Group CLP-F01Appendix Panel Data Transmit Panel Data ContentsMidi Master Volume Data format F0H 7EH XnH 09H 01H F7H General Midi Mode OnMidi Parameter Change table Multi Part Effect Midi MapMidi Parameter Change table Effect Midi Implementation Chart ON/OFF Memo Memo Please Keep this Manual FCC Information U.S.A North America Clavinova Web site English only Yamaha Manual Library