Yamaha CLP-F01 Engage Record mode, Select the record track, Start recording, Stop recording

Page 33

3 Engage Record mode.

Press the [REC] button to engage Record mode.

 

 

 

 

Recording does not actually start yet.

 

 

The [TRACK 1] or the [TRACK 2] indicator flashes

 

 

in red.

 

 

 

 

The amount of memory available for recording will

 

 

flash

be shown on the LED display in approximate kilo-

 

 

bytes, and the right-most dot on the LED display

 

 

will flash at the current METRONOME tempo setting.

 

 

Record mode can be disengaged before recording by pressing the [REC] button a second time.

4 Select the record track.

When Record mode is engaged in the previous step, the last-recorded track will automatically be selected for recording and its indicator — i.e. the [TRACK 1] or [TRACK 2] button indicator — will glow red. If you want to record on a differ- ent track, press the appropriate track button so that its indicator glows red.

5 Start recording.

Recording will begin automatically as soon as you play a note on the keyboard or press the SONG [START/STOP] button. The current measure number will appear on the display while recording.

6 Stop recording.

Press either the [REC] or SONG [START/STOP] button to stop recording.

The indicator of the recorded track will glow green to indicate that it now con- tains data. (Record mode is disengaged automatically.)

7 Play back the recorded performance.

Press the SONG[START/STOP] button to play back the recorded performance. To stop playback in the middle of a song, press the SONG[START/STOP] but- ton.

NOTE

The amount of memory avail- able for recording:

This value in KiloBytes (a unit used of measurement for data) indicates how much space remains available for recording on the Clavinova. You can record up to a maximum of about 9,400 notes on the CLP- F01 depending on pedal usage and other factors.

TIP

If a user song ([USER 1/2/3]) is not selected (the lamp is not lit), pressing the [REC] button will result in the [USER 1] song’s [TRACK 1] being selected and Record mode engaged.

At this time, [TRACK 2] play- back will be turned off if the track contains data.

TIP

If the metronome was on when you started recording, you’ll be able to keep time with the met- ronome while recording, but the metronome sound will not be recorded.

TIP

For more recording information, see page 35.

TIP

The left pedal can be assigned to start and stop recording via the “Left Pedal Mode” function described on page 46.

NOTE

The record track indicator will begin to flash when the recorder memory is almost full. If the memory becomes full during recording, “FUL” will appear on the display and recording will stop automatically. (All recorded data up to that point will be retained.)

NOTE

Pressing the SONG [START/ STOP] button to start recording, then pressing it again to stop recording will erase all previ- ously-recorded data on the selected track.

ENGLISH

CLP-F01Recording Your Performance

33

 

 

Page 32 Page 34
Image 33
Page 32 Page 34
Contents CLP-F01 Special Message Section Precautions Connections Introduction TrademarksReference AppendixTable of Contents Application Index Tuning AccessoriesBench may be included or optional, depending on your locale TransportingTranspose FeaturesKey Cover Before Using the ClavinovaTo open the key cover To close the key coverMusic Rest To position the music rest for useTo replace the music rest Connect the power cord Turning the Power OnTurn the power on Power indicatorSetting the Volume Using Headphones optionUsing the Speaker Switch Memo Panel Controls and Terminals Clavinova’s various functionsConnectors Panel Controls and TerminalsTop panel Display Listening to the Demonstration Tunes Engage Preset Song mode Listening to 50 Piano Preset SongsPlay any of the 50 preset songs Stop playbackHow to use the practice functions Exit from Preset Song modeTurn off the playback part you wish to practice Start playback and playingLeft Pedal Start/Stop Will appear on the dis Repeat for 50 Preset SongsSelecting & Playing Voices Using the PedalsSelecting Voices Damper Right PedalNormal setting Sostenuto Center PedalSoft Left Pedal Adjusting Effect Depth Adjusting Reverb DepthDepth 0 no effect Depth 0 no effect Depth 20 maximum effect depthTouch Sensitivity Touch Changing the volume when Fixed is selectedTranspose Transposition TransposeCombining Two Voices Dual mode Engage Dual modeExit Dual mode and return to normal play mode Split Engage Split modePress the Split button again so that its indicator goes out Exit Split mode and return to normal play modeSelect a voice for the right hand Select a voice for the left handAdjusting the tempo Using the MetronomeAdjusting the time signature Start the metronomeRecording Your Performance Make all the initial settingsSelect a song for recording Recording vs. SavingSelect the record track Engage Record modeStart recording Stop recordingRecording to Track Re-recording TrackIndividual Tracks Voice selectionEntire Song You can change the following initial settings Change the settings via the panel controlsPress the REC button to exit Record mode Playing Back Recorded Songs Midi connectorsPlaying Back a Song Select the desired songTurning track playback on and off Useful Playback FunctionsAssigning the START/STOP function to the left pedal SynchroParameter List Detailed Settings FunctionEngage Function mode Basic Procedure in Function ModeSelect a function Use the -/NO +/YES buttonsDo the following when you finish using the func- tion Operation Example 1 F1. Fine tuning of the pitchOperation Example 2 F3.1 Dual Balance About Each Function Setting rangeDisplay Value Hz HertzPureMajor/PureMinor EqualPythagorean MeanToneSub-mode Dual Balance ResetDual Detune Voice 1 Octave Shift Voice 2 Octave ShiftSplit Balance Sub-mode Split PointRight Voice Octave Shift Left Voice Octave Shift Right Voice Effect Depth Left Voice Effect DepthKeyoff Sample Volume Sub-mode Left Pedal ModeSoft Pedal Effect Depth Sustain Sample DepthSub-mode Midi Transmit Channel Selection F6. Metronome VolumeMidi Receive Channel Selection Setting range ON/OFF Normal setting onLocal Control ON/OFF Program Change ON/OFFMidi Transmit Transpose ProcedurePanel/Status Transmit Bulk Data DumpFactory Preset Recall Sub-mode Voice Midi Tuning OthersSetting range ON/OFF Normal setting OFF all groups Description of sub-modes VoiceTo Host connector Midi connectorsAbout Midi Midi cablesConnections ConnectorsAUX in L/L+R jack or AUX OUT L/L+R jack AUX in R, L/L+R jacksOn the power to the computer first, then to the Clavinova Connecting a Personal ComputerConnection Type of serial cables and connection pin assignmentsClavinova Host Select switch setting Set the Clavinova Host Select switch to MidiConnection Computer Problem Possible Cause and Solution TroubleshootingKeyboard Stand Assembly Removing the panelsInsert the rear panel center Voltage Selector Install the rear panels left and rightFasten the rear panels securely Attach the fall-prevention bracketReview the assembly procedure and correct any errors After completing the assembly, please check the followingMove the Clavinova to an appropriate location Check the connectionVoice Name Stereo Touch Dynamic Key-Off Voice Descriptions Preset Voice ListWood Bass Piano Voice Demo Description Demo Song ListVoice Name Title Composer Voice Name Piano Voice DemoIndex Soft Pedal 16, 24 Practicing a One-Hand Part Using 50 Preset Songs......2016, 29 Start/Stop playbackAppendix Backup Group Function number Default Backup GroupFunction CLP-F01Appendix Panel Data Contents Midi Master VolumePanel Data Transmit Data format F0H 7EH XnH 09H 01H F7H General Midi Mode OnEffect Midi Map Midi Parameter Change table EffectMidi Parameter Change table Multi Part Midi Implementation Chart ON/OFF Memo Memo Please Keep this Manual FCC Information U.S.A North America Clavinova Web site English only Yamaha Manual Library
Top Page Image Contents