Yamaha owner manual CLP-F01Appendix

Page 69

MIDI Data Format / MIDI-Datenformat /

Format des données MIDI / Formato de datos MIDI

If you’re already very familiar with MIDI, or are using a computer to control your music hardware with computer- generated MIDI messages, the data provided in this section can help you to control the CLP-F01.

Falls Sie bereits mit MIDI vertraut sind oder einen Computer zur Erzeugung von MIDI-Steuermeldungen für die Instrumente verwenden, können Sie sich zur Steuerung des CLP-F01 nach den im folgenden Abschnitt aufgeführten Spezifikationen richten.

1. NOTE ON/OFF

Data format: [9nH] -> [kk] -> [vv]

9nH = Note ON/OFF event (n = channel number)

kk= Note number (Transmit: 09H ~ 78H = A-2 ~ C8 / Receive: 00H ~ 7FH = C-2 ~ G8)*

vv = Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)

Data format: [8nH] -> [kk] -> [vv] (reception only)

8nH = Note OFF event (n = channel number)

kk= Note number: 00H ~ 7FH = C-2 ~ G8 vv = Velocity

* If received value exceeds the supported range for the selected voice, the note is adjusted by the necessary num- ber of octaves.

2.CONTROL CHANGE

Data format: [BnH] -> [cc] -> [vv]

BnH = Control change (n = channel number)

cc = Control number vv = Data Range

(1)Bank Select

 

ccH

Parameter

Data Range (vvH)

 

00H

Bank Select MSB

00H:Normal

 

20H

Bank Select LSB

00H...7FH

 

Bank selection processing does not occur until receipt of next

 

Program Change message.

 

(2)

Main Volume (reception only)

 

ccH

Parameter

Data Range (vvH)

 

07H

Volume MSB

00H...7FH

(3)

Expression

 

 

ccH

Parameter

Data Range (vvH)

 

0BH

Expression MSB

00H...7FH

(4)

Damper

 

 

ccH

Parameter

Data Range (vvH)

 

40H

Damper MSB

00H...7FH

(5)

Sostenuto

 

 

ccH

Parameter

Data Range (vvH)

 

42H

Sostenuto

00H-3FH:off, 40H-7FH:on

(6)

Soft Pedal

 

 

ccH

Parameter

Data Range (vvH)

 

43H

Soft Pedal

00H-3FH:off, 40H-7FH:on

(7)

Effect1 Depth (Reverb Send Level)

 

ccH

Parameter

Data Range (vvH)

 

5BH

Effect1 Depth

00H...7FH

 

Adjusts the reverb send level.

 

(8)

Effect4 Depth (Variation Effect Send Level)

 

ccH

Parameter

Data Range (vvH)

 

5EH

Effect4 Depth

00H...7FH

Si vous êtes très familier avec l’interface MIDI ou si vous utilisez un ordinateur pour commander votre matériel de musique au moyen de messages MIDI générés par ordinateur, les données suivantes vous seront utiles et vous aideront à commander le CLP-F01.

SI usted está ya familiarizado con MIDI, o si emplea una computadora para controlar sus aparatos musicales con mensajes MIDI generados por computadora, los datos proporcionados en esta sección le ayudarán a controlar la CLP-F01.

3. MODE MESSAGES

Data format: [BnH] -> [cc] -> [vv]

BnH = Control event (n = channel number)

cc = Control number vv = Data Range

(1)All Sound Off

ccH

Parameter

Data Range (vvH)

78H

All Sound Off

00H

Switches off all sound from the channel. Does not reset Note On and Hold On conditions established by Channel Messages.

(2) Reset All Controllers

 

 

ccH

Parameter

Data Range (vvH)

79H

Reset All Controllers

00H

Resets controllers as follows.

 

 

Controller

Value

Expression

127 (max)

Damper Pedal

0

(off)

Sostenuto

0

(off)

Soft Pedal

0

(off)

(3) Local Control (reception only)

 

ccH

Parameter

Data Range (vvH)

7AH

Local Control

00H (off), 7FH (on)

(4) All Notes Off

 

 

ccH

Parameter

Data Range (vvH)

7BH

All Notes Off

00H

Switches OFF all the notes that are currently ON on the spec- ified channel. Any notes being held by the damper or soste- nuto pedal will continue to sound until the pedal is released.

(5) Omni Off (reception only)

 

ccH

Parameter

Data Range (vvH)

7CH

Omni Off

00H

Same processing as for All Notes Off.

(6) Omni On (reception only)

 

ccH

Parameter

Data Range (vvH)

7DH

Omni On

00H

Same processing as for All Notes Off.

(7) Mono (reception only)

 

ccH

Parameter

Data Range (vvH)

7EH

Mono

00H

Same processing as for All Sound Off.

(8) Poly (reception only)

 

ccH

Parameter

Data Range (vvH)

7FH

Poly

00H

Same processing as for All Sound Off.

•When control change reception is turned OFF in the Function mode, control change data will not be transmitted or received except for Bank Select and Mode messages.

•Local on/off, OMNI on/off are not transmitted. (The appropriate note off number is supplied with “All Note Off” transmission).

•When a voice bank MSB/LSB is received, the number is stored in the internal buffer regardless of the received order, then the stored value is used to select the appropriate voice when a program change message is received.

•The Multi-timbre and Poly modes are always active. No change occurs when OMNI ON, OMNI OFF, MONO, or POLY mode messages are received.

CLP-F01Appendix 69

Page 68 Page 70
Image 69
Page 68 Page 70
Contents CLP-F01 Special Message Section Precautions Connections Introduction TrademarksReference AppendixTable of Contents Application Index Tuning AccessoriesBench may be included or optional, depending on your locale TransportingTranspose FeaturesKey Cover Before Using the ClavinovaTo open the key cover To close the key coverMusic Rest To position the music rest for useTo replace the music rest Connect the power cord Turning the Power OnTurn the power on Power indicatorSetting the Volume Using Headphones optionUsing the Speaker Switch Memo Panel Controls and Terminals Clavinova’s various functionsConnectors Panel Controls and TerminalsTop panel Display Listening to the Demonstration Tunes Engage Preset Song mode Listening to 50 Piano Preset SongsPlay any of the 50 preset songs Stop playbackHow to use the practice functions Exit from Preset Song modeTurn off the playback part you wish to practice Start playback and playingLeft Pedal Start/Stop Will appear on the dis Repeat for 50 Preset SongsSelecting & Playing Voices Using the PedalsSelecting Voices Damper Right PedalNormal setting Sostenuto Center PedalSoft Left Pedal Adjusting Effect Depth Adjusting Reverb DepthDepth 0 no effect Depth 0 no effect Depth 20 maximum effect depthTouch Sensitivity Touch Changing the volume when Fixed is selectedTranspose Transposition TransposeCombining Two Voices Dual mode Engage Dual modeExit Dual mode and return to normal play mode Split Engage Split modePress the Split button again so that its indicator goes out Exit Split mode and return to normal play modeSelect a voice for the right hand Select a voice for the left handAdjusting the tempo Using the MetronomeAdjusting the time signature Start the metronomeRecording Your Performance Make all the initial settingsSelect a song for recording Recording vs. SavingSelect the record track Engage Record modeStart recording Stop recordingRecording to Track Re-recording TrackIndividual Tracks Voice selectionEntire Song You can change the following initial settings Change the settings via the panel controlsPress the REC button to exit Record mode Playing Back Recorded Songs Midi connectorsPlaying Back a Song Select the desired songTurning track playback on and off Useful Playback FunctionsAssigning the START/STOP function to the left pedal SynchroParameter List Detailed Settings FunctionEngage Function mode Basic Procedure in Function ModeSelect a function Use the -/NO +/YES buttonsDo the following when you finish using the func- tion Operation Example 1 F1. Fine tuning of the pitchOperation Example 2 F3.1 Dual Balance About Each Function Setting rangeDisplay Value Hz HertzPureMajor/PureMinor EqualPythagorean MeanToneSub-mode Dual Balance ResetDual Detune Voice 1 Octave Shift Voice 2 Octave ShiftSplit Balance Sub-mode Split PointRight Voice Octave Shift Left Voice Octave Shift Right Voice Effect Depth Left Voice Effect DepthKeyoff Sample Volume Sub-mode Left Pedal ModeSoft Pedal Effect Depth Sustain Sample DepthSub-mode Midi Transmit Channel Selection F6. Metronome VolumeMidi Receive Channel Selection Setting range ON/OFF Normal setting onLocal Control ON/OFF Program Change ON/OFFMidi Transmit Transpose ProcedurePanel/Status Transmit Bulk Data DumpFactory Preset Recall Sub-mode Voice Midi Tuning OthersSetting range ON/OFF Normal setting OFF all groups Description of sub-modes VoiceTo Host connector Midi connectorsAbout Midi Midi cablesConnections ConnectorsAUX in L/L+R jack or AUX OUT L/L+R jack AUX in R, L/L+R jacksOn the power to the computer first, then to the Clavinova Connecting a Personal ComputerConnection Type of serial cables and connection pin assignmentsClavinova Host Select switch setting Set the Clavinova Host Select switch to MidiConnection Computer Problem Possible Cause and Solution TroubleshootingKeyboard Stand Assembly Removing the panelsInsert the rear panel center Voltage Selector Install the rear panels left and rightFasten the rear panels securely Attach the fall-prevention bracketReview the assembly procedure and correct any errors After completing the assembly, please check the followingMove the Clavinova to an appropriate location Check the connectionVoice Name Stereo Touch Dynamic Key-Off Voice Descriptions Preset Voice ListWood Bass Piano Voice Demo Description Demo Song ListVoice Name Title Composer Voice Name Piano Voice DemoIndex Soft Pedal 16, 24 Practicing a One-Hand Part Using 50 Preset Songs......20 16, 29 Start/Stop playbackAppendix Backup Group Function number Default Backup GroupFunction CLP-F01Appendix Panel Data Contents Midi Master VolumePanel Data Transmit Data format F0H 7EH XnH 09H 01H F7H General Midi Mode OnEffect Midi Map Midi Parameter Change table EffectMidi Parameter Change table Multi Part Midi Implementation Chart ON/OFF Memo Memo Please Keep this Manual FCC Information U.S.A North America Clavinova Web site English only Yamaha Manual Library
Top Page Image Contents