Sideburner Ignitor Lighting
1.Turn gas on at LP tank.
2.Push in and turn knob to HIGH.
3. | Turn or push | (up to 5 times to light burner). Be sure burner lights | |
| and stays lit. |
| |
4. | If burner does not light turn knob(s) to OFF, wait 5 minutes, try again. | ||
| Match Lighting |
| |
| 1. | Turn gas on at LP tank. |
|
| 2. | Hold lit match to any port on the burner. Push in and turn | |
|
| sideburner knob to HIGH. Be sure burner lights and stays lit. | |
•If burner does not light turn knob(s) to OFF, wait 5 minutes, try again. If the burner does not ignite with valve open, gas will continue to flow out of the burner and could accidently ignite with risk of injury
Burner Flame Check | HIGH | |
• Light burner, rotate knob(s) from HIGH to LOW. | ||
You should see a smaller flame in LOW | LOW | |
position than seen on HIGH. Always check | ||
| ||
flame prior to each use. Perform flame check |
|
for sideburner (if equipped). If only low flame is seen refer to "Sudden drop or low flame" in the Troubleshooting Section.
Turning Grill Off
•Turn all knobs to OFF position. Turn LP tank OFF by turning
Ignitor Check
•Turn gas off at LP tank. Press ignitor button or turn ignitor knob rapidly. "Click" should be heard and spark seen each time between collector box or burner and electrode. See "Troubleshooting" if no click or spark.
Valve Check
•Important: Make sure gas is OFF at LP tank before checking valves. Knobs lock in OFF position. To check valves, first push in knobs and release, knobs should spring back. If knobs do not spring back, replace valve assembly before using grill. Turn knobs to LOW position then turn back to OFF position. Valves should turn smoothly.
Hose Check
•Before each use, check to see if hoses are cut or worn. Replace damaged hoses before using grill. Use only valve/hose/regulator specified by manufacturer.
13