Coleman 9944-857 manual To Set Up, Fill Pan with Water, Open Lid

Optional 2nd Side Table

To Set Up

Step 1

■Remove stove, legs and regulator from packaging.

■Regulator is packed in the end of the Styrofoam near front of stove.

■Inspect all packing and remove all parts.

■Your unit includes:

(1)Side table(s) - 2nd table optional

(1)Stove

(1)Lid

(1) Waterpan

(1) Regulator

(1) Grill

(4) Legs

■See replacement parts list for identification.

Step 2

■ Use a ground cloth
to protect the finish.
■ Place stove on back
and remove side tables.	Optional
	2nd Side
	Table

■Remove legs from mounting brackets on bottom of stove.

Optional

Table

■Thread legs into receivers on bottom of stove handles.

4

■Stand stove up and adjust leg level- ers if necessary.

Step 3

■Place side table wire fingers in holes on top of stove handles and push down on table until it stops.

Step 4

■Open Lid.

■Remove packing from cooking surfaces, merchandising material from inside lid, and any other combustible materials from inside the stove.

Fill Pan with Water

CAUTION

•Do not use the stove without the water pan in place.

•Coleman recommends water in the water pan when in use. This will help prevent a grease flare-up.

■Make sure pins in

WATER PAN match holes in

COOKTOP.

■Cleanup will be improved if you fill WATER PAN to mark indicated (MAX).