Brinkmann 8300 owner manual Installation Information, LP GAS Cylinder not Supplied with this Grill

Page 5

WARNING

•FOR OUTDOOR USE ONLY. DO NOT operate indoors or in an enclosed area such as a garage, shed or breezeway.

•Use your grill OUTDOORS in a well ventilated space away from dwellings or other buildings to prevent dangers associated with gas accumulation and toxic vapors. We recommend your grill be situated at least 10 feet (3.1 m) from buildings. Not adhering to these clearances will prevent proper ventilation and may increase the risk of a fire and/or property damage, which could also result in personal injury.

•Maintain a minimum clearance of 36 inches (91 cm) between all sides of grill, deck railings, walls or other combustible material. DO NOT use grill under overhead unprotected combustible construction.

•DO NOT use or install this grill in or on a recreational vehicle and/or boat.

INSTALLATION INFORMATION:

The installation of this appliance must be in accordance with:

All applicable local codes, or in the absence of local codes, either:

•National Fuel Gas Code ANSI Z223.1 NFPA 54

•Natural Gas and Propane Installation Code: CAN/CGA B149.1

•Natural Gas Installation Code: CAN/CGA B149.1 (Canada)

•Propane Installation Code: CAN/CGA B149.2 (Canada)

To check your local codes, see your local LP gas dealer or natural gas company. This grill was not intended to be connected to a natural gas supply line. If an external electrical source is utilized, it must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA 22.1.

WARNING

LP GAS CYLINDER (NOT SUPPLIED WITH THIS GRILL)

The LP cylinder is available for purchase at the same location the grill was purchased.

The LP (Liquid Propane) gas cylinder specifically designed to be used with this grill must have a 20 lb. (9.1 kg) capacity incorporating a Type 1 cylinder valve and an over-filling protection device (OPD).

•This grill is designed to fit Worthington, Manchester or SMPC brand 20 lb. (9.1 kg) cylinders. Other brand DOT cylinders may fit this grill if the cylinder has similar dimensions of the top and bottom rings.

•DO NOT connect this grill to an existing #510 POL cylinder valve with Left Hand threads. The Type 1 valve can be identified with the large external threads on the valve outlet.

•DO NOT connect to a propane cylinder exceeding this capacity.

•DO NOT connect to a cylinder that uses any other type of valve connection device.

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Avis À L’INSTALLATEUR Important Safety Table of Contents General Warnings LP GAS Cylinder not Supplied with this Grill Installation InformationCylinder Specifications Regulator Resetting Procedure Installing the LP GAS Cylinder Onto the GrillFilling the LP GAS Cylinder Hose and RegulatorConnecting Hose and Regulator Connecting Hose and Regulator to AN LP GAS CylinderChecking for Leaks Leak TestingWhen to Perform a Leak Test PRE-START Check List Match Lighting the Main Burners Lighting InstructionsLighting the Main Burners Turning OFF the Grill Lighting the Side BurnerMatch Lighting the Side Burner Breaking in Your Grill Operating the GrillPreheating the Grill Controlling FLARE-UPSSide Burner Rotisserie CookingHelpful Hints CleanlinessGrilling to Proper Temperature Burner ASSEMBLY/MAINTENANCE Cleaning and MaintenanceTransporting and Storage Cooking GrillsHeat Distribution Plates Before Storing Your Grill Trouble ShootingFrequently Asked Questions Frequently Asked Questions Parts BAG Contents Parts List Assembly Instructions1519 Step Snap wheel hubcaps onto the outside of wheels as illustrated Grill Body Assembly Step Attach hose heat shield using two #8 self-tapping screws Step Place the side burner grate onto the side burner table Step Portland 8300 Assembled Importantes Relatives À LA Sécurité Mises EN GardeTable DES Matières Mises EN Garde Mises EN Garde GénéralesBouteille DE GPL NON Fournie Avec CE Gril Renseignements SUR L’INSTALLATIONSpécifications DE LA Bouteille Remplissage DE LA Bouteille DE GPL Installation DE LA Bouteille DE GPL SUR LE GrilTuyau ET Régulateur Procédure DE Réenclenchement DU RégulateurRaccordement DE L’ENSEMBLE Tuyau / Détendeur Quand Effectuer UNE Épreuve D’ÉTANCHÉITÉ Épreuves D’ÉTANCHÉITÉListe DE Contrôle Avant L’ALLUMAGE Allumage DES Brûleurs Principaux À L’AIDE D’UNE Allumette Consignes D’ALLUMAGEAllumage DES Brûleurs Principaux Fermeture DU Gril Allumage DU Brûleur LatéralAllumage DU Brûleur Latéral À L’AIDE D’UNE Allumette Mise EN Marche DE Votre Gril Utilisation DU GrilPréchauffage DU Gril Contrôle DES EmbrasementsBrûleur Latéral Cuisson AU TournebrocheConseils Utiles PropretéGrillage À LA Bonne Température Assemblage ET Entretien DES Brûleurs Nettoyage ET EntretienGrilles DE Cuisson Assemblage DU Brûleur / Entretien SuitePlaques DE Diffusion Thermique Transport ET EntreposageDépannage Avant Dentreposer Votre GrilQuestions Posées Fréquemment Questions Posées Fréquemment Liste DES Pièces Instructions D’ASSEMBLAGEPage Contenu DU SAC DE Pièces Étape Étape LAssemblage du Corps du Grill Étape Étape Avertissement Contenant à Graisse Plateau à Graisse Étape Portland 8300 Assemblé Warranty
Top Page Image Contents