Teledyne 356WA instruction manual Trace Oxygen Analyzer Appendix Specifications

Trace Oxygen Analyzer Appendix

Appendix

Specifications

Standard Ranges:	Three ranges between 0-10 PPM and
	0-5000 PPM O2 (0-2 PPM O2 avail-
	able as an option).
Sampling System:	Wetted parts: 304 welded stainless
	steel.
Sensitivity:	1% of low range.
Accuracy:	+2% of low range.
Response and Recovery Time:	90% in less than 1 minute (for lowest
	range).
Operating Temperature Range:	+40 °F to +120 °F (+5 °C to +49 °C).
Sample Requirement:	Flow: 150 cc/min.*
	Pressure: 1 to 150 psig.
	Temperature: +60 °F to +100 °F
	(+15 °C to +38 °C)
Power Requirement:	115 VAC, 50/60 Hz, 150 W (other
	voltages available.)
Alarms:	Adjustable single or dual alarm (op-
	tional) setpoints.
Recorder Signal Output:	Voltage: 0-1 VDC or less.
	Current: 1-5, 4-20, 10-50 mADC
	(optional.)
Local Readout:	Digital or analog meter.

*Specified flow rate required only during calibration. Measuring cell is not sensitive to changes in flow rate.

Teledyne Analytical Instruments A-1