A&D TM-2430-13 instruction manual Main Screen Description

2-3 Main Screen Description

The main screen is comprised of six menus and two toolbar buttons located permanently along the top of the screen. These menus may be used to access the various features of the software. The toolbar buttons may be used to set Partial Analysis and Blood Pressure Mode parameters.

Toolbar Buttons: (Only for TM-2420/TM-2421, TM-2430)

	Button	See	Description
	Analysis Intervals	“2-4-1 Analysis Intervals”	The Analysis Intervals button may be used
			to define specific “Full” and “Partial” time
			intervals within an opened data file for
			custom data analysis.
			Note: Not available with the UA-767PC.
	BP Mode	“2-4-2 BP Mode”	The BP Mode selection box may be used
			to specify which blood pressure
			measurement		method	(Korotkoff,
			oscillometric or both) is used as the basis
			for statistical and graphical analysis.
			Note: This only applies to TM-2421 data
				files.
Main Menus:
	Menu	See	Description
	File	“2-5 File Menu”	The File menu may be used to manage the
			files stored on the hard drive or a floppy disk
			and to exit the software.
	View	“2-6 View Menu”	The View menu may be used to access the
			statistical, tabular, and graphical analysis
			screens.
	Recorder	“2-7 Recorder Menu”	The Recorder menu may be used to
			program the monitor, clear measurement
			data in the monitor’s memory and to retrieve
			the measurement data from the monitor.
	Report	“2-8 Report Menu”	The Report menu may be used to specify
			report formats and print reports.
	Option	“2-9 Options Menu”	The Options menu may be used to set the
			default	settings	and	user-defined
			parameters.
	Help	“2-10 On-line Help”	The Help menu may be used to view
			information on software usage. Help may
			also be accessed by pressing F1 when
			various screens are opened or by clicking
			the Help button on a screen.

9