A&D TM-2430-13 instruction manual 3-2 TM-2430 Series Setup, Description of each mode is as follows

Page 37

Step 13 Select the Interval drop-down menu for Period Three (3) and set the measurement Interval for Period Three (3) to: OFF, 1, 3, 5, 10, 15, 20, 30, 60 or 120 minutes.

Step 14 If you want to program a fourth period, go to step 15.

If you do not want to program a fourth period, go to step 17.

Step 15 Select the Time field for Period Four (4) and enter the time you want for this period; the end period for Period Four (4) will be the Time for Period (1). Use military time to set the Time. See examples at the end of this section.

Step 16 Select the Interval drop-down menu for Period Four (4) and set the measurement Interval for Period Four (4) to: OFF, 1, 3, 5, 10, 15, 20, 30, 60 or 120 minutes.

Step 17 If the intervals are set correctly, click the OK button to confirm the programming. If they are not correct, reset them, or go to step 18.

Step 18 To cancel the programming and close the Recorder–Setup dialog box, click the Cancel button.

2-7-3-2 TM-2430 Series Setup

The recorder setup for the TM-2430 series is similar to the TM-2420/TM-2421 except that it includes two additional options for setting the BP measurement intervals as shown in Figure 22.

Figure 22: TM-2430 series Recorder-Setup dialog box

Description of each mode is as follows:

Mode 1 07:00-21:59 The measurement is performed every 15 minutes. 22:00-06:59 The measurement is performed every 30 minutes.

Mode 2 The AUTO ON/OFF key is pressed at rising and going to bed so that the measurement

intervals are changed and the time during sleep can be distinguished on the data. When the “S” is off, the measurement is performed every 15 minutes.

When the “S” is displayed, the measurement is performed every 30 minutes.

Mode 3 The measurement interval can be changed six times within a maximum of 24 hours. (The monitor can store six measurement intervals (periods) in 24 hours. A period consists of a start time and interval.)

36

Image 37

Contents TM-2430-13 Contents Troubleshooting About the Data Analysis Software IntroductionMonitoring Device Review SymbolsSafety Installing the SoftwareSoftware Package Components System RequirementsGetting Started Connecting the TM-2420/TM-2421 to the computerCommunication Between the Monitor and the Software Communication Between the Monitor and the SoftwareConnecting the TM-2430 series to the computer Connecting the UA-767PC to the computer Main Screen Description Toolbar Analysis Intervals BP ModeMethod Setting Description Menu Description File MenuDelete Save AsFile Merge ConvertSelect the Merge the BP data files sub-menu Click Open PrintExit Saving a FileView Menu Summary Data display Summary Data Tab Definition Errors forBP Blood Status See 3-1 Measurement ErrorsEntering Comments Excluding/Including BP MeasurementsSystolic/Diastolic Blood Pressure BP Trend Linking to Trends ScreenPulse Pulse Trend Mean Arterial Blood Pressure MAP TrendSleep Delimitation, Scroll Bar and Linking Partial AnalysisBlood Pressure Trend BP Limits Scroll bar/LinkingScaling the Screen Viewing the TrendsTrend Display Positioning Trends Creating a New/Edit Trends Template Trend Page Setup dialog boxBlood Pressure Trend Setup dialog box Correlation Plots display Diastolic Blood Pressure Systolic Blood PressureMAP, Mean Blood Arterial Pressure PulseCircadian Rhythm display HIB analysis display HIB AnalysisIntervals and Conditions Field DescriptionData retrieval. See 2-7-1 Retrieving Data from the Monitor Physician ListSelect the Patient Information sub-menu Recorder MenuSelect the Recorder menu Select the Retrieve data sub-menu Retrieving Data from the MonitorClick the Retrieve Data button Select the Recorder menu Clearing The Monitor’s MemoryMonitoring session is performed at the same interval for TM-2420/TM-2421 Recorder Setup dialog box Description of each mode is as follows 3-2 TM-2430 Series SetupPeriod Start Interval Monitor programming example Example Programming the Monitor for Three 3 PeriodsOFF Example Programming the Monitor for Four 4 PeriodsBlood Pressure Measurement Available only with the UA-767PC 3-4 UA-767PC SetupReport dialog box Report MenuCreating a New Report Template Report setup dialog boxEditing an Existing Report Template Saving a Default Report Template for PrintingDeleting an Existing Report Template Printing an Existing Report TemplateOptions Menu Editing an Existing Physician in the List Adding a New Physician to the ListDeleting an Existing Physician in the List Trend Display See 2-6-3-3 Trend Display Positioning TrendsDefault Blood Pressure Settings dialog box Serial Port On-line HelpRecorder Type 1 TM-2420/TM-2421 Error Codes Measurement ErrorsBe erased Well as programmed intervalsBe taped to the arm with the supplied 2 TM-2430 Series Error Codes Communications Error dialog box Communication ErrorsMissing Files Reports Are Not Printing With the Desired BP ModeSummary Data / Sleep Tab Data can not be Seen Printout Examples Summary data Full and partial Text data Summary data Awake and sleep Text data Blood pressure data Text data Trend graph Blood pressure and double product Graphical data Page Page Mini report Mini report Terms Related to Statistics Terms Related to Blood PressureMesor Terms Related to Biological Rhythm95% confidence interval is expressed Terms Related to the Risk Management of High Blood Pressure Memo Memo Memo