A&D TM-2430-13 instruction manual Retrieving Data from the Monitor, Click the Retrieve Data button

2-7-1 Retrieving Data from the Monitor

Figure 19: Recorder-Retrieve Data dialog box

See below for the description of each field on the Recorder-Retrieved Data dialog box.

Field	Description
Recorder ID	Recorder ID is set in the monitor’s memory prior to the monitoring
	session.
Start Date	Date of first measurement in the monitor’s memory.
Start Time	Time of first measurement in the monitor’s memory.
Patient Name	Field for the patient’s name.
Convert Data	Creates a CSV file automatically when checked.
Status	Status line offers comments on the present stage of the data retrieving
	process, e.g. “connected” or “retrieving data”.

With the monitor and the processor connected to the computer, you may retrieve data from the monitor by completing the steps below:

Step 1 Select the Recorder menu.

Step 2 Select the Retrieve data sub-menu.

Step 3 Select the Patient name field and input the patient’s name. The name will appear in the Name field on the Patient Information screen.

Note: You must input a patient name or the data can not be retrieved. To exit the Retrieve Data dialog box prior to retrieving the data, click the Windows™ close button in the top right corner of the Recorder–Retrieve Data dialog box.

Step 4 Click the Retrieve Data button.

Step 5 Select the File Name field and enter a file name.

Step 6 Select the Drive and Directory where the file should be saved.

32