Avaya A6000, AP60 Access Point Configuration, Radio setting 802.11b or 802.11g, Preamble settings

Page 8

Aruba Mobility Controller	Configuration Guide
	VIEW Certified

7.Select the AES-CCMoption for WPA2-AES-PSK encryption.

8.Under WPA2, select the PSK AES-CCMoption.

9.Select PSK Passphrase (alphanumeric) from the Format drop-down list before typing in the passphrase.

10.Enter the PSK AES Key/Passphrase.

11.Click the Apply button.

Navigating to other pages without saving/applying the changes will result in the loss of the changes.

When using the 802.11b/g band for the VoWiFi network, set the radio settings to 802.11b/g mixed mode.

The tests on the Aruba system were run with the short preamble setting.

The short preamble setting can be used, as this supports both short and long preambles. Wireless IP Telephones only support long preamble.

When using a dual-radio AP, use the 802.11a radio for data and 802.11b/g for voice if possible, as this will improve the overall performance.

Page 8

Image 8

Contents Service Information Configuration GuideCertified Product Summary View CertifiedInterface setting Default routeNetwork Topology Deployment DescriptionConnecting to the Mobility Controller Connecting the APsCommand, comment, and screen text key Known LimitationsVia the Web interface Ssh admin@switch IP addressVia the CLI Initial Setup Welcome to Aruba Wireless Networks ArubaProvisioning APs Connecting APsAssigning an IP to the Mobility Controller Ssid Configuration CLI command configurationWeb-based configuration Configure terminal ap location x.y.zAccess Point Configuration Radio setting 802.11b or 802.11gPreamble settings Enter the PSK AES Key/PassphraseChannel and Tx power Recommended AP configuration settingsEssid Commands Ap location x.y.zFor ARM Assignment, select Disabled For ARM Assignment, select Disabled Security Policies and Quality of Service QoS Dynamic RF Management ARM Aware ScanningCreate policies for the wireless IP telephone user Create an alias for the AvppAssign policies to the role Authentication Quality of Service QoSSubnet Roaming User-role phones session-acl phoneaclCLI commands to set up subnet roaming Commands for the master switch the ArubaFrom the Aruba Commands to verify setup for sub-net routingCommands for the local switch the Aruba Checking the Configuration Show ap config location x.y.zShow stm connectivity Show station-table