Avaya A2400 Checking the Configuration, Show ap config location x.y.z, Show stm connectivity

Page 20

Aruba Mobility Controller	Configuration Guide
	VIEW Certified

Checking the Configuration

Verify connectivity by pinging between the switches, the AP’s, and the Avaya Voice Priority Processor and Avaya Call Server.

The switch and AP are now ready for use with wireless IP telephones.

To show AP settings:

To show all APs connected to a switch:

To show clients associated all APs:

To show clients associated to a specific AP:

Page 20

Image 20

Contents Service Information Configuration GuideCertified Product Summary View CertifiedInterface setting Default routeNetwork Topology Deployment DescriptionConnecting to the Mobility Controller Connecting the APsCommand, comment, and screen text key Known LimitationsVia the Web interface Ssh admin@switch IP addressVia the CLI Initial Setup Welcome to Aruba Wireless Networks ArubaProvisioning APs Connecting APsAssigning an IP to the Mobility Controller Ssid Configuration CLI command configurationWeb-based configuration Configure terminal ap location x.y.zAccess Point Configuration Radio setting 802.11b or 802.11gPreamble settings Enter the PSK AES Key/PassphraseChannel and Tx power Recommended AP configuration settingsEssid Commands Ap location x.y.zFor ARM Assignment, select Disabled For ARM Assignment, select Disabled Security Policies and Quality of Service QoS Dynamic RF Management ARM Aware ScanningCreate policies for the wireless IP telephone user Create an alias for the AvppAssign policies to the role Authentication Quality of Service QoSSubnet Roaming User-role phones session-acl phoneaclCLI commands to set up subnet roaming Commands for the master switch the ArubaFrom the Aruba Commands to verify setup for sub-net routingCommands for the local switch the Aruba Checking the Configuration Show ap config location x.y.zShow stm connectivity Show station-table