Maxon Telecom WL7-VERS. C-1K installation instructions Checking Hydraulic Fluid Level

CHECKING HYDRAULIC FLUID LEVEL - Continued

11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713

3.Pull out filler cap (FIG. 40-1). Fill the reservoir with hydraulic fluid (TABLE 40-1)to level shown in FIG. 40-1.

Reinstall filler cap (FIG. 40-1).

RECOMMENDED HYDRAULIC FLUID

BRAND	PART NUMBER
ROSEMEAD	THS FLUID 17111
EXXON	UNIVIS HVI 26

TABLE 40-1

NOTE: If the expected seasonal temperatures are below 20°F, use MIL-H-5606G hydraulic fluid.

4.Bolt on the pump cover as shown in FIG. 39-2. Tighten the 5/16”-18 cover screws until snug.

FILLER

CAP

RESERVOIR

2”

HYDRAULIC FLUID LEVEL

(LH PUMP SHOWN)

FIG. 40-1

PATENTS PENDING 40