FWD WHEELCHAIRS | PROCEDURE 8 |
Armrest Plate | Armrest Pad |
Armrest Insert
Lug Bolt
Locknuts
Phillips Screw
Locknuts
Washers
|
| Phillips |
|
| Screw |
Hex Bolts | Washers | Spacers |
5.Position the mounting holes in the two (2) new seat positioning strap halves with the mounting holes in the seat frame assembly.
6.Reinstall the two (2) hex bolts, washers and locknuts that secure the seat positioning strap to the seat frame assembly and tighten securely.
7.Install the captain's seat onto the wheelchair. Refer to REMOVING/INSTALLING CAPTAIN'S SEAT in PROCEDURE 9 of the owner's manual, part number 1080737.
REPLACING CAPTAIN'S SEAT (FIGURE 8)
1. Remove the Captain's seat from the wheelchair. Refer |
to REMOVING/INSTALLING CAPTAIN'S SEAT in |
PROCEDURE 9 of the owner's manual part number |
1080737. |
F
W
D
W
H
E
E
L
C H A I R S
Joystick Mounting
Seat Frame
2. Remove the four (4) hex screws and washers that se- |
Bracket
Assembly
cure existing captain's seat to the seat frame assembly. |
3. Line up mounting holes in the new captain's seat |
FIGURE 6 - REPLACING ARMREST PLATE
REPLACING SEAT POSITIONING STRAP (FIGURE 7)
NOTE: The following procedure is for Captain's Seats only.
1. | Remove the Captain's seat from the wheelchair. Refer |
| to REMOVING/INSTALLING CAPTAIN'S SEAT in |
| PROCEDURE 9 of the owner's manual, part number |
| 1080737. |
2. | Remove the two (2) hex bolts, washers and locknuts |
| that secure the seat positioning strap to the seat frame |
| assembly. |
| with mounting holes in the seat frame assembly. |
4. | Apply Loctite 242 to the hex screws. |
5. | Install the four (4) hex screws and washers through |
| the seat frame assembly and into the new captain's |
| seat. Tighten securely. |
6. | Install the new captain's seat onto the wheelchair. |
| Refer to REMOVING/INSTALLING CAPTAIN'S |
| SEAT in PROCEDURE 9 of the owner's manual, part |
| number 1080737. |
Captain's Seat
3. Remove the two (2) halves of the seat positioning strap |
Seat Frame
Seat Frame
from the seat frame assembly. |
4. Position the two (2) new seat positioning strap halves |
on the inside of the seat frame assembly as shown in |
FIGURE 7. |
Assembly
Assembly
Seat Positioning
Strap
Washer | Seat Frame |
| |
| Assembly |
| Locknut |
Hex Bolt
FIGURE 7 - REPLACING SEAT POSITIONING STRAP
Hex Screws
(Apply Loctite Washers
242)
FIGURE 8 - REPLACING CAPTAIN'S SEAT
REPOSITIONING MKIV JOYSTICK - CAPTAIN’S SEAT (FIGURE 9)
1.Turn the lever on the adjustment lock to release the adjustment lock from joystick mounting tube.
2.Remove the joystick from the wheelchair.
23