Invacare M61, M50, M51 service manual EMI Information

Page 17

SECTION 2—EMI INFORMATION

SECTION 2—EMI INFORMATION

WARNING

CAUTION: IT IS VERY IMPORTANT THAT YOU READ THIS INFORMATION REGARDING THE POSSIBLE EFFECTS OF ELECTROMAGNETIC INTERFERENCE ON YOUR POWERED WHEELCHAIR.

Electromagnetic Interference (EMI) From Radio Wave Sources

Powered wheelchairs and motorized scooters (in this text, both will be referred to as powered wheelchairs) may be susceptible to electromagnetic interference (EMI), which is interfering electromagnetic energy (EM) emitted from sources such as radio stations, TV stations, amateur radio (HAM) transmitters, two way radios, and cellular phones. The interference (from radio wave sources) can cause the powered wheelchair to release its brakes, move by itself, or move in unintended directions. It can also permanently damage the powered wheelchair's control system. The intensity of the interfering EM energy can be measured in volts per meter (V/m). Each powered wheelchair can resist EMI up to a certain intensity. This is called its "immunity level." The higher the immunity level, the greater the protection. At this time, current technology is capable of achieving at least a 20 V/m immunity level, which would provide useful protection from the more common sources of radiated EMI.

There are a number of sources of relatively intense electromagnetic fields in the everyday environment. Some of these sources are obvious and easy to avoid. Others are not apparent and exposure is unavoidable. However, we believe that by following the warnings listed below, your risk to EMI will be minimized.

The sources of radiated EMI can be broadly classified into three types:

1)Hand-held Portable transceivers (transmitters-receivers with the antenna mounted directly on the transmitting unit. Examples include: citizens band (CB) radios, "walkie talkie", security, fire and police transceivers, cellular telephones, and other personal communication devices).

NOTE: Some cellular telephones and similar devices transmit signals while they are ON, even when not being used.

2)Medium-range mobile transceivers, such as those used in police cars, fire trucks, ambulances and taxis. These usually have the antenna mounted on the outside of the vehicle; and

3)Long-range transmitters and transceivers, such as commercial broadcast transmitters (radio and TV broadcast antenna towers) and amateur (HAM) radios.

NOTE: Other types of hand-held devices, such as cordless phones, laptop computers, AM/FM radios, TV sets, CD players, cassette players, and small appliances, such as elec- tric shavers and hair dryers, so far as we know, are not likely to cause EMI problems to your powered wheelchair.

Part No. 1125075

17

Pronto® Series

Image 17
Contents Pronto Series M50 M51 M61 Reference Documents Recommended ToolsRecommended Tools Document Part NumberTable of Contents Asba Seat ArmsVAN Seat Shrouds and Frame Front RIGGINGS/FOOTBOARDWheels Motors BatteriesElectronics AccessoriesLimited Warranty Wheelchair TIE-DOWN Restraints and Seat Restraints Signal Word MeaningSpecial Notes Special Notes Label Location Asba Typical Product ParametersMedium SEMI-RECLINE Typical Product Parameters Medium Operation Information Controller Settings/Repair or ServiceGeneral Guidelines Immediately Tire PressureBatteries Charging Batteries Grounding InstructionsRain Test Weight TrainingWeight Limitation EMI Information EMI InformationEMI Information All Wheelchairs Safety INSPECTION/TROUBLESHOOTINGSafety Inspection Checklists Solutions TroubleshootingAdditional Requirements for M61 Wheelchairs WheelsComments Display Description DefinitionSPJ Information Gauge Display Diagnostics Diagnostics Code Diagnostic CodesPossible Solution SUB CodeE05 Motor/Gearbox/Brake Symptom Probable Cause SolutionsContamination is found. Refer to Replacing Motor Battery Battery Charger DON’T Checking Battery Charge LevelM61 Only Field Load Test Battery Quality Motor TestingM50 and M51 Wheelchairs Manufactured Before 8/15/05 Turning the Power On/OffWheelchair Operation Turn the power On by pressing the On/Off button Using the Joystick to Drive the WheelchairReverse Movement ActionAdjusting the Speed Using the Horn M50 M51 Wheelchairs Manufactured Before 15/05 Using the HornM50/M51 Wheelchairs Manufactured After 8/14/05 and All M61 Elevating the SeatElevating the Seat On/Off Toggle Switch SPJJoystick Switches and IndicatorsSpeed Control Knob JoystickInformation Gauge Display Mode Button SPJ+ and SPJ+ w/ACC Joystick Switches and IndicatorsOn/Off Button Mode ButtonSpeedometer Speed Control ButtonsService Indicator Arms Removing/Installing Van Seat ArmAdjusting Van Seat Arm Width Adjusting Van Seat Arm Height Adjustable Height Arms Only Adjusting Van Seat Arm AngleAdjusting Van Seat Arm Height Adjustable Height Arms Only Replacing Van Seat Armrest AssemblyRemoving/Installing Flip Back Armrest Removing/Installing Flip Back ArmrestAdjusting the Flip Back Armrest Height Adjusting the Flip Back Armrest HeightVAN Seat Adjusting the Back AngleSemi-Recline Back Angle Fold Down Back AngleRemoving/Installing the Seat Assembly Adjusting the Headrest Semi-Recline OnlyInstalling RemovingRemoving/Installing the Seat Assembly Adjusting Seat DepthAdjusting Seat Depth M50/M51 Wheelchairs Adjusting the Seat HeightSets of Seat Total Number Length of Mounting M61 WheelchairsAdjusting the Seat Height M61 Wheelchairs Adjusting Seat Position on Seat Base Seat Position Weight Seat Post Inch Standard Limitation Mounting HoleReplacing the Seat Positioning Strap Replacing the Seat Positioning StrapAsba Seat M50/51 Wheelchairs Only Adjusting the Seat Height M50/51 Wheelchairs Only Weight Seat Post Seat Depth Limitation Mounting Hole InchM61 Wheelchairs Removing/Installing the Seat Pan Removing/Installing the Seat Frame Adjusting the Seat WidthRemoving/Installing the Seat Frame Adjusting the Seat PositionAdjusting the Seat Position Removing/Installing the Seat Positioning StrapHeight, only new back canes will be needed Back UpholsteryAsba Seat Asba Seat Height Back HeightAdjusting the Back Angle Adjusting the Back Angle Front RIGGINGS/ Footboard Installing/Removing Front RiggingsModel PHWH93 Front Riggings Adjusting Footrest HeightModel PH904A and PHAL4A Front Riggings Replacing Heel LoopsVan Seats Adjusting/Replacing Telescoping Front Rigging SupportsRaising/Lowering Elevating Front Riggings Position Asba SeatFront Rigging Standard Inch OUT Inches OUT Removing/Installing the Footboard Assembly Angle Adjusting the Footboard AssemblyDepth Adjusting the Footboard Assembly AngleReplacing the Front/Rear Casters WheelsAdjusting Caster Assembly Adjusting Caster AssemblyRemoving/Installing the Front Headtube Assembly Removing/Installing the Front/Rear Caster AssembliesRemoving the Drive Wheel Removing/Installing the Drive WheelInstalling the Drive Wheel Removing/Installing the Drive Wheel Inner Rim Shrouds and Frame Removing/Installing the Top ShroudRemoving/Installing the Top Shroud Removing/Installing the Side ShroudsRemoving/Installing the Side Shrouds Removing/Installing the Front ShroudRemoving/Installing the Front Shroud Removing/Installing the Inner ShroudsRemoving/Installing the Inner Shrouds Removing/Installing the Pivot TubeRemoving/Installing the Pivot Tube Removing/Installing the Walking Beam Removing/Installing the SureStep SpringRemoving/Installing the Walking Beam Removing/Installing the Elevate ActuatorInstalling Removing/Installing the Elevate Actuator Removing/Installing the Actuator Switch Sensor Batteries Removing/Installing Batteries from/into Battery Tray Using the Proper BatteriesBatteries Tool QTY Comments Connecting Battery Cables Connecting/Disconnecting Battery Cables102 Connecting/Disconnecting Battery Cables Charging Batteries Disconnecting Battery CablesBattery Charger Operation On-Board Battery Charger Charging Indicator Status ON/OFF Indicator StatusReplacing the On-Board Battery Charger Fuse Replacing the On-Board Battery Charger Fuse Replacing the On-Board Battery Charger110 Replacing the On-Board Battery Charger Motors Removing/Installing the MotorRemoving/Installing the Motor Engaging/Disengaging Motor Release Lever Engaging/Disengaging Motor Release LeverRemoving/Installing the Motor Release Lever Removing/Installing the Motor Release LeverReplacing Motor Brushes 117 Replacing Motor Brushes Electro-Mechanical Parking Brake TestingElectro-Mechanical Parking Brake Testing Electronics Removing/Installing the JoystickVan Seat Repositioning the Joystick Mounting BracketRepositioning the Joystick Mounting Bracket Connecting Disconnecting/Connecting the JoystickDisconnecting Adjusting Lock/Release Tension Adjusting the Quad-Link Retractable MountReplacing the Controller Adjusting Lock/Release TensionReplacing the Controller Wire Routing Wire RoutingInstalling/Removing the Crutch/Cane Holder AccessoriesHolder Installing/Removing the Oxygen HolderUsing the Walker Holder Installing/Removing/Using the Walker HolderInstalling/Removing the Walker Holder 131 Limited WarrantyUSA
Related manuals
Manual 2 pages 51.97 Kb Manual 2 pages 41.81 Kb