Invacare M51, M50, M61 service manual SPJ Information Gauge Display Diagnostics

SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING

SPJ Information Gauge Display Diagnostics

DISPLAY	DESCRIPTION	DEFINITION	COMMENTS
	All three LEDs are Off.	Power is Off.
INVACARE

All three LEDs are On.	Power is On.	Fewer than three LEDs
		On implies reduced
		battery charge.
INVACARE
RED LED is flashing.	Battery charge is low.	The batteries should be
		charged as soon as
		possible.
INVACARE
Left to Right “chase”	Joystick is in	The steady LEDs indicate
alternating with steady	programming, inhibit	the current state of the
display.	and/or charging mode.	battery charge.
INVACARE
GREEN LED is flashing.	Joystick is in Speed Limit	The current state of
	mode.	battery charge will be
		displayed at the same
INVACARE		time.

All LEDs are flashing slowly. Joystick has detected Out-	Release the joystick back
of-Neutral-at-Power-Up	to Neutral.
mode.

INVACARE

All LEDs are flashing quickly.

Joystick has detected a fault.

Joystick uses Flash codes to indicate faults.

INVACARE

Pronto® Series 22 Part No. 1125075