Invacare M51, M50, M61 service manual Replacing Van Seat Armrest Assembly

SECTION 5—ARMS

Angle	Pinch Point	Socket Screw
	Armrest

Count Exposed Threads Jam Nut

Height
	Armrest
Height
Adjustment
Holes	Arm Frame
Lock Knob
	Assembly

FIGURE 5.2 Adjusting Van Seat Arm Height (Adjustable Height Arms Only)

Replacing Van Seat Armrest Assembly

NOTE: For this procedure, refer to FIGURE 5.3.

1.If necessary, remove the joystick. Removing/Installing the Joystick on page 120.

2.Remove the mounting screw, washers and locknut that secure the existing armrest assembly to the arm post.

3.Position the new armrest assembly on the armrest post and secure with the mounting screw, washers, and locknut. Refer to FIGURE 5.3 for correct hardware orientation.

4.If necessary, install the joystick. Removing/Installing the Joystick on page 120.

5.Repeat STEPS 1-4 for the opposite armrest assembly, if necessary.

Washer	Armrest
	Assembly

Mounting Screw

Arm Post

Locknut

Washers

FIGURE 5.3 Replacing Van Seat Armrest Assembly

Pronto® Series 46 Part No. 1125075