Invacare M61, M50, M51 Adjusting the Seat Position, Removing/Installing the Seat Frame

SECTION 7—ASBA SEAT

4.Install the accessories, if necessary. Refer to Accessories on page 128.

Seat Frame

Accessory Tube

Hex Screws

Seat Frame Plate

Locknuts

FIGURE 7.5 Removing/Installing the Seat Frame

Adjusting the Seat Position

NOTE: For this procedure, refer to FIGURE 7.6 on page 66.

NOTE: The seat is shipped from the factory in the standard position. The seat can be moved 1-inch forward or 1-inch rearward. See Detail “A”).

1.Remove the four mounting screws, washers and locknuts securing the seat frame plate and 1-inch adjustment spacers* to the seat pivot.

*NOTE: M61 wheelchairs may have up to two sets of 1-inch adjustment spacers between the seat frame plate and the seat pivot.

2.Reposition the seat frame plate, 1-inch adjustment spacers* and seat pivot to align the mounting holes with the desired seat adjustment position (Detail “A”).

3.Secure the seat frame plate and 1-inch adjustment spacers* to the seat pivot using the four mounting screws, washers and locknuts. Torque to 13 ft-lbs ± 20%.

Part No. 1125075 65 Pronto® Series