SECTION
SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING
Checklist
These adjustments should be made whenever you service this product, especially as a part of the initial set up. Follow these maintenance procedures:
WARNING
Before performing any maintenance, adjustment or service, turn power off.
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks and wear, and should be replaced.
❑Check pneumatic tires for proper inflation.
❑Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑Ensure all clothing guard fasteners are secure.
❑Clean seat upholstery and armrests.
❑Ensure armrest pads sit flush against arm tubes.
❑Ensure seat is secured to wheelchair frame.
❑Ensure seat release latches are functional. Replace if necessary.
❑Inspect seat upholstery for rips or sagging.
❑Ensure no excessive side movement or binding occurs when drive wheels are lifted and spun when disengaged (freewheeling).
❑Ensure caster assembly has proper tension when caster is spun. Caster should come to a gradual stop.
❑Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑Ensure all caster/wheel/fork/headtube fasteners are secure.
❑Ensure that casters are free of debris.
❑Inspect tires for flat spots and wear.
❑Inspect for any loose hardware on the wheelchair.
❑Inspect the seat positioning strap for signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑Inspect charger AC power cord for damage. Replace if necessary.
❑Check that all labels are present and legible. Replace if necessary.
❑Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
At’m and At’m QT | 16 | Part No. 1125078 |