Invacare 1125078 service manual Replacing the Seat Latches

SECTION 5—SEAT

5.Mount the front seat tube to the seat frame with the two mounting bolts. Refer to Detail “A” of FIGURE 5.4.

6.Install the under seat basket. Refer to Removing/Installing Under-Seat Basket on page 34.

7.Install the arm tubes. Refer to Removing/Installing Arm Tube on page 39.

8.Install the seat. Refer to Removing/Installing the Seat on page 31.

Replacing the Seat Latches

NOTE: For this procedure, refer to FIGURE 5.5.

1.Remove the seat. Refer to Removing/Installing the Seat on page 31.

2.Turn the seat upside down.

3.Perform one of the following:

•For Rear Seat Latches - untie the release cord from the latch.

•For Front Seat Latches - remove the front seat release loop.

4.Remove mounting bolt and locknut that secures the latch to the seat frame.

NOTE: DO NOT remove the latch bolt.

5.Insert the new latch onto the frame.

6.Install the mounting bolt and locknut.

7.Perform one of the following:

•For Rear Seat Latches - insert the release cord through the hole in the latch and secure the cord to the latch.

•For Front Seat Latches - secure the front seat release loop to the latch with the one locknut.

8.Install the seat. Refer to Removing/Installing the Seat on page 31.

Latch	Latch Bolt
	DO NOT Remove

Locknut

Mounting Bolt

Seat Frame

FIGURE 5.5 Replacing the Seat Latches

At’m and At’m QT 36 Part No. 1125078