Invacare 1125078 service manual Motor/Gearbox/Brake, Symptom Probable Cause Solutions

Page 22

SECTION 3—SAFETY INSPECTION/TROUBLESHOOTING

Motor/Gearbox/Brake

SYMPTOM

PROBABLE CAUSE

SOLUTIONS

 

 

 

Erratic perfor-

Low tire pressure.

Inflate tires to the proper tire pressure.

mance of wheel-

 

 

chair (driving uphill,

 

 

increase in braking

 

 

distance).

 

 

 

 

 

Wheelchair will not

Low tire pressure.

Inflate tires to the proper tire pressure.

drive.

 

 

 

Motor engagement handles are dis-

Engage motor engagement handles.

 

engaged.

 

 

Batteries require charging.

Charge batteries. Make sure the setting on the

 

 

charger is correct.

 

Charger plugged in.

Unplug charger from wall outlet before operating

 

 

the wheelchair.

 

Circuit breaker tripped.

Press the reset button. Refer to Resetting the Cir-

 

 

cuit Breaker on page 54.

 

 

 

Motors stall and

Current rollback.

Stop driving and let electronics cool.

start up again.

 

 

 

 

 

Motor “chatters”

Electrical malfunction.

Contact Invacare.

or runs irregularly.

 

 

 

 

 

Only one drive

Electrical malfunction.

Contact Invacare for service.

wheel turns.

 

 

 

One motor is disengaged.

Engage motor engagement handle.

 

 

 

Joystick erratic or

Electrical malfunction.

Contact Invacare for service.

does not respond

 

 

as desired.

Controller programmed improperly.

Reprogram controller (Refer to electronics man-

 

 

ual supplied with wheelchair).

 

 

 

Wheelchair does

Poor battery terminal connection.

Have terminals cleaned.

not respond to

 

 

commands.

 

 

 

 

 

Power indicator off

Electrical malfunction.

Contact Invacare for service.

- even after

 

 

recharging.

 

 

 

 

 

At’m and At’m QT

22

Part No. 1125078

Image 22
Contents At’m and At’m QT Reference Documents Reference DocumentsWheelchair Type Electronics Manual Table of Contents Joystick Table of ContentsArms BatteriesTransporting the Wheelchair Limited Warranty ANTI-TIPPERSSpecial Notes Signal Word MeaningWheelchair TIE-DOWN Restraints and Seat Restraints Label Location At’mAt’m QT Typical Product Parameters Typical Product ParametersParameters General Guidelines Repair or Service InformationTire Pressure Oxygen Operation InformationBatteries Charging Batteries Grounding Instructions Weight TrainingWeight Limitation Rain TestEMI Information EMI InformationEMI Information Safety INSPECTION/TROUBLESHOOTING ChecklistWheels Solutions TroubleshootingInformation Gauge and Diagnostics Codes WheelsDisplay Description Definition Comments Possible Solution Diagnostics CodeSUB Code E05 E08 Symptom Probable Cause Solutions Motor/Gearbox/BrakeDamaged connector or worn Down, and recharge the wheelchair overnight with Troubleshooting Battery Troubleshooting Battery Charger Field Load Test Checking Battery Charge LevelDON’T Battery Quality Field Load TestElectro-Mechanical Parking Brake Test Electro-Mechanical Parking Brake TestAdjusting Footboard Assembly Height Footboard AssemblyRemoving/Installing the Footboard Assembly InstallingRemoving/Installing the Seat SeatRemoving/Installing the Seat Replacing Seat Positioning Strap Replacing Seat Positioning StrapRemoving/Installing Under-Seat Basket Removing/Installing Seat UpholsteryRemoving/Installing Seat Upholstery Replacing the Seat Latches Replacing the Seat LatchesRemoving/Installing Arm Pads ArmsRemoving/Installing Arm Pads Replacing Clothing GuardRemoving/Installing Arm Tube Removing/Installing Arm TubeConnecting Disconnecting/Connecting the JoystickDisconnecting JoystickRemoving/Installing the Joystick JoystickRemoving/Installing the Joystick Repositioning the Joystick to Opposite Arm Recommended Battery Type BatteriesRemoving/Installing the Battery Pack on the At’m Recommended Battery TypeRemoving/Installing the Battery Box on the At’m QT Removing/Installing the Battery Pack on the At’mRemoving/Installing the Battery Box on the At’m QT Negative Black Removing Removing/Installing the At’tm QT Battery Box Assembly Removing/Installing the At’tm QT Battery Box Assembly Charging Using an Independent Charger Charging BatteriesMulti-Function Charger Port Resetting the Circuit Breaker At’m10 Resetting the Circuit Breaker At’m At’m QTMotors Engaging/Disengaging the MotorsRemoving/Installing Motor Shroud Removing/Installing Motor ShroudRemoving/Installing the Base Plate Removing/Installing the Base PlateRemoving/Installing MK5 Controller Removing/Installing MK5 ControllerRemoving/Installing the Motors Removing/Installing MK5 Controller InstallingRemoving/Installing the Motors Replacing the Knurled CylinderMotors Replacing the Knurled Cylinder Installing/Removing the Front Rigging Support Brackets Front RiggingsInstalling/Removing the Front Rigging Assembly Front RiggingsAdjusting Footrest Height Installing/Removing the Front Rigging AssemblyWheels and Casters Replacing Front CastersAdjusting Forks Replacing ForksRemoving/Installing the Drive Wheels Replacing Forks Adjusting ForksRemoving/Installing the Drive Wheels Replacing Drive Wheels on the Drive AxleRemoving/Installing the Anti-Tippers ANTI-TIPPERSRemoving/Installing the Anti-Tippers- At’m Removing/Installing the Anti-Tippers- At’m QT Transporting the Wheelchair Transporting the WheelchairTransporting the Wheelchair Limited Warranty USA