SECTION
Replacing Seat Positioning Strap
WARNING
ALWAYS wear your seat positioning strap.
The seat positioning strap is a positioning belt only. It is not designed for use as a safety device withstanding high stress loads such as auto or aircraft safety belts. If signs of wear appear, belt MUST be replaced IMMEDIATELY.
NOTE: For this procedure, refer to FIGURE 5.2.
1.Remove the locknut that secures one seat positioning
NOTE: DO NOT remove the mounting screw.
2.Slide the seat positioning
3.Position one new seat positioning
4.Reinstall the locknut that secures the seat positioning
5.Repeat STEPS 1- 4 for the other half of the seat positioning strap.
One Seat Positioning |
|
One Seat Positioning | |
| |
|
Wheelchair | Locknut |
Frame |
|
Mounting Screw
NOTE: DO NOT remove the mounting screw.
NOTE: Seat upholstery not shown for clarity.
FIGURE 5.2 Replacing Seat Positioning Strap
Part No. 1125078 | 33 | At’m and At’m QT |