SECTION 11—WHEELS AND CASTERS
WARNING
Pull the drive wheel to ensure that the drive wheel is locked in place before operat- ing the wheelchair. Otherwise, serious injury or damage may occur.
Motor Engagement Handle in
Side view | the Disengaged Position |
|
Top view
Drive Wheel
Wheelchair |
|
Frame | Drive Axle |
Drive Wheel
NOTE: Removing/installing the drive wheel on the At’m shown. The drive wheel on the At’m QT installs/removes the same way.
FIGURE 11.3 Removing/Installing the Drive Wheels
Replacing Drive Wheels on the Drive Axle
WARNING
Maintain tire pressure at 30 p.s.i.
NOTE: For this procedure, refer to FIGURE 11.4. |
|
1. Remove the drive wheel. Refer to |
|
Removing/Installing the Drive Wheels | Drive Wheel |
on page 69. |
|
2.Depress the quick release button on the drive axle, and remove the axle from the tire.
3.Insert the drive axle into a new drive wheel.
Drive Axle
Quick Release
Button
4. Replace the drive wheel onto the chair. | FIGURE 11.4 Replacing Drive Wheels on | |
Refer to Removing/Installing the Drive | ||
the Drive Axle | ||
Wheels on page 69. | ||
| ||
|
|
At’m and At’m QT | 70 | Part No. 1125078 |