SECTION 8—BATTERIES
| Connector on |
Connector on | Battery Box |
Battery Tray | (Hidden from View |
| Battery Box |
| Handle |
| Battery Box |
Battery Tray
Wheelchair Base
FIGURE 8.3 Removing/Installing the Battery Box on the At’m QT
Removing/Installing the Batteries From/Into the At’m Battery Pack
NOTE: For this procedure, refer to FIGURE 8.4 on page 48.
Removing
1.Remove the battery pack from the wheelchair. Refer to Removing/Installing the Battery Pack on the At’m on page 45.
2.Open the battery pack by performing the following -
A.Grasp the side flaps and pull up.
B.Grasp the front flap and pull up.
3.Disconnect the wiring harness from the batteries in the following order -
A.NEGATIVE
B.POSITIVE (+) RED battery cable from POSITIVE (+) battery terminal/post on the right battery.
C.WHITE battery cable (jumper) from the POSITIVE (+) battery terminal/post on the left battery and the NEGATIVE
4.Remove the batteries from the battery pack.
Part No. 1125078 | 47 | At’m and At’m QT |