Invacare 1125078 service manual Removing/Installing the Joystick

	SECTION 7—JOYSTICK
DETAIL “A” - AT’M	Joystick	Battery
Connector	Connector
from Controller		Pack

Light GREY

Collar

Wheelchair Base

DETAIL “B” - AT’M QT	Connector	Battery Box
	from Controller

Joystick

Connector

Light GREY

Collar

Wheelchair Base

FIGURE 7.1 Disconnecting/Connecting the Joystick

Removing/Installing the Joystick

NOTE: For this procedure, refer to FIGURE 7.2 on page 42.

Removing

1.Disconnect the joystick. Refer to Disconnecting/Connecting the Joystick on page 40.

2.Cut the tie-wraps that secure the joystick cable to the wheelchair arm and frame. Refer to Detail “A” of FIGURE 7.2.

3.Pull the hook-and-loop fastening strap connecting the under seat basket to the chair.

4.Cut the three tie-wraps that secure the joystick cable to the wheelchair frame.

5.Remove the two quick-release pins that mount the joystick to the arm.

6.Remove the joystick and mounting bracket assembly.

Part No. 1125078 41 At’m and At’m QT