Adcom A723, A720 manual Adc N

Page 2

ADC N

T E L E M E T R Y

ADCON TELEMETRY GMBH

I N K U S T R A S S E 2 4

A-3400 KLOSTERNEUBURG

A U S T R I A

TEL: +43 (2243) 38 280-0

FAX: +43 (2243) 38 280-6

h t t p : / / w w w . a d c o n . a t

Proprietary Notice:

The Adcon logo, the A720 and A730 series, addIT™, the A840 series, addVANTAGE®, addVAN- TAGE Lite and addVANTAGE Pro are trademarks or registered trademarks of Adcon Telemetry. All other registered names used throughout this publication are trademarks of their respective owners.

Neither the whole nor any part of the information contained in this publication may be repro- duced in any material form except with the prior written permission of Adcon Telemetry.

This publication is intended only to assist the reader in the use of the product. Adcon Telemetry shall not be liable for any loss or damage arising from the use of any information in this publica- tion, or any error or omission in such information, or any incorrect use of the product.

Document Release 2.0, August 2000

Copyright ©1999-2004 by Adcon Telemetry GmbH.

All rights reserved.

Image 2

Contents ADC N ADC N Contents Contents Introduction What are addIT devices?Installation issues Conventions ItalicsChapter Using the Base Station Opening the packagesInstalling the base station Installing the receiverInstalling the power supply AddIT Power SupplyReplacing the fuse Conﬁguring the softwareUsing the RTU Installing the RTU Shows an addIT RTUShows what a typical RTU ﬁeld installation looks like More about the LED tool Conﬁguring an addIT RTU in the addVANTAGE software RTU batteryMaintaining and servicing the RTU Changing the battery Chapter Chapter Performing Advanced Functions Device series Understanding connectorsReceiver connector RTU connectors Pins on an I/O Connector Top ViewAddIT RTU Power Connector Top View Conﬁguring the devicesGeneral format of an answer General format of a commandSerial communication protocol SET Ownid nnnn Using terminal commandsSeries 1 devices SET PMP 63 SET OwnidSET PMP bl bh SET Slot 3600SET Rssi value SET Freq freq stepSET Freq 467112500 Querying the actual conﬁguration parameters SET RssiSeries 2 and 3 devices CmdsFreq FreqFreq 433925000 Freq 433925000 25000Slot PMP 193 CM 1 PMP 65 72193 cm SSTDEV ReplDEL Repl 5667DEL Dd mm yyyy hh mm ss si ft d1 d2 ... dn dd mm yyyy Data 5666 12/12/1998Data b1 b2 b3 ... bn Dn csFrame 38 description Data 6367 30/4/1999 Frame 39 descriptionRoute DataImme Fdev InfoTemp = internalTem p Anlg Info 255 0 18/4/1999 21511 1.3 0 0 0 91146 900 Code Description Parameters Returns Sampling methods are deﬁned by three bits, as follows Return result depends on the control byte see table. However A720B and A723, but see also the comments in Remote on Performing Advanced Functions Command Code Deﬁnitions Port 193 TX 6789 Port 7/5/1999 183422193 RX #7851 BA 6789 B#234 BA 15190 BVER 1.3 Blst 30/8/2001 160341VER VER 2.0Notiﬁcations Device descriptors and storage handler Returned errors listCommand line interpreter Real time clockNotiﬁcations Chapter Appendix. Speciﬁcations Parameter Min Typ Max UnitTransmitter all measurements made on a 50 Ω resistive load Chapter Chapter Index INFO, 41 OWNID, 26 PMP PMP What a base station contains Xmit Colophon Credits and ColophonCredits