Toshiba SL-9000-LSB owner manual Print Format, By pressing Key

Page 43

11. PROGRAMMING PROCEDURES

11.10 PRINT FORMAT

11.10 PRINT FORMAT

Menu Group:

2

Item No.:

0

The SL-9000 can memorize 5 different print formats. After print formats are set, you can call them by entering the print format number.

<MENU>

Group 2

0

Select the print format # which allocates the label format #

by the NEXT PLU key or – key.

Enter the label format #.

(Refer to Table 2)

CHANGE

PLU

Issue method

On-demand

 

 

 

 

 

Batch

Select "SENSIBILITY ADJUST"

SET

 

by pressing the

key.

NEXT

When Batch Printing with backing paper is selected, the sensitivity of the label sensor will be set by pressing the SET NEXT key before issuing label.

 

 

j

 

FEED

TEST

Is print

Correct

position

 

 

 

correct?

 

Incorrect

Select the Item for adjustment.

1 gradation

= 0.154mm (1 dot)

1 gradation

= 0.462mm (3 dots)

1 gradation

= 0.462mm (3 dots)

Only when using the bar code change label with pre-feed area. (This adjustment cannot be made for the Variable Length Label.)

Enter the correct label feed value.

(Range: 0~199)

Enter the correct value for commodity name position. (Range: 0~9)

Enter the correct value for address position. (Range: 0~15)

Enter the correct value for pre-feed area.

(Range: 0~65)

ENTER

ENTER

ENTER

ENTER

j

j

j

j

CHANGE

PLU

<MENU>

PROG.

Group 2

 

Main

ESC.

<MENU>

 

NOTES:

1.When a commodity name position is adjusted, an address position will move automatically.

2.When entering the other label format #, fine adjust values are initialized.

3.Selecting label format numbers other than those provided in Table 2 results in an error.

4.When selecting a variable length label format, rectangles are printed instead of print items when test printing.

5.Pressing the key allows you to select a print format number from 1 to 5.

6.Be sure to press the SET NEXT key when a label format for batch printing with backing paper is selected.

11-16

Image 43
Contents SL-9000-LSB Series Page TOC Operating Procedures Password SecuritySetting Password and Protect Menu Calling Menu by Entering PasswordPage Meanings of Each Symbol Safety SummaryPrecautions Introduction Applicable Model Accessories9 0 0 0 3 0 M L S B U S Scale SpecificationSource Or Part No OptionCMT/PL-3 I/F LON I/F AppearanceUS Type DisplayCA Type QR Type AU Type Weight Unit Price$/kg Programming Keyboard KEY LayoutSets a block PLU # using the confirmation label procedure Deletes a selected character when setting commodity namesInserts a space when setting a commodity name Displays the next line when setting the ingredientOperation Keyboard Function Operation Keyboard and Speed KEY BoardSelection mode Sets the quantity of commodity in by Count modeCancels preceding data Enables calling the other 70 speed keysNo function Issues a test labelAdjusts the zero point Issue. Optional key by initial settingNutrition Setting Procedure Before OperationSpeed KEY SET Remote Display Installation ProcedureInstallation Procedure Level Adjustment Removal and Replacement of Media Removal and Replacement of Media Menu selection Outline of OperationHow to access the Programming Menu Programming ProceduresHow to Select Menu and Item No Title and Contents of Programming Menu Change PLU How to enter charactersTEC Store 2nd line TELMenu Unit Price ChangeGroup Main Menu PLU Data SettingUPC# PLU#Ingredient Message Nutrition Facts Group Set th e Daily Value Table Daily Value Max digits Contents of daily valueDeleting Nutrition Data Memory file is sorted when a memory full error occursMemory file sort Group PLU Verifying LabelAddress Setting Menu Group Item No Special InformationSetting Department/Vendor Number Speed KEY SettingBy pressing Key Print Format22/38 Label Format Number Table11.12 CMT/PL-3 DATE/TIME SettingPL-3 Operation Error code during PL-3 operationSave Operable Inoperable Transmission Item ListIN-LINE/LOCAL Transmission Delay Time TableID # LON SystemChange Data TransmissionVendor Nutrition Free FormatChanged format BAR Code FormatCurrent format Flag UPC #PLU# UPC# Flag PLU # UPC# PC/D Price WeightH H H H C C C CTitle No Format Additional 221 Enter the title #Enter the title See NoteTransferring Logo Data Error message during data transmissionTime OUT Error Data ErrorVendor Setting Idiom SettingMAG Magnification 0 normal Free Format SettingKey functions ROT Rotation11-30 B a C DAvailable format and print items for free format Programmed Data Verification Reports How to access the Read menuSee the next For Setting Password and Protect Menu Password Security13-2 REG Calling Menu by Entering PasswordHow to access the REG., M.DOWN, or Rewrap menu Operating ProceduresSample label Weighing OperationFIX Price Operation for US Type only Sample label for US type Sample label for CA and QR type By Count Operation14-5 Print Count Operation From the platter Labels are being issued Example B When operating in Fix or By Count modePLU For Issuing Labels with NET Weight Statement for US Type only14-10 Remove the commodity Together with the container TARE/SAVE Function ProceduresRemove the commodity Calling and Printing Grade Lines Or C Calling and Printing LogosMenu REG, M.DOWN, or Rewrap Mode WEIGH, FIX, or by Count Selecting Print Item and Adjusting the LCD BrightnessDate Change Batch Print Mode with 30 Items Run Assignment Changing a Unit Price and Calling G.Line/LOGO Preset Count Stopping or Canceling Label IssueOne vendor Commodities Floating VendorEnter vendor # Receipt will be issuedTotal Operation How to access the Read or Reset menuReset READ5 RESET6Grand Total Report Hourly Total ReportPLU Total Report Zone Total Ex. PLU Zone Total PLU #100~107 Vendor Total ReportIndividual Total Ex. Individual PLU Total PLU #100 Block Total Ex. UPC Block Total UPC #100100~100199Programming Mode Error Message TableRead and Reset Mode Label Issue ModeLON System Mode CMT Operation ModeCleaning the Print Head Before You Call for Service Troubleshooting