11. PROGRAMMING PROCEDURES
11.14 LON SYSTEM
Data Transmission
The following data are |
|
Page 1: (0). All (PLU+ING+NUTRI) | Page 2: (0). SPEED KEY |
(1). PLU | (1). LOGO |
(2). ING. | (2). VENDOR |
(3). NUTRITION | (3). FREE FORMAT |
(4). U. PRICE | (9). CHANGE PAGE |
(5). DATE/TIME
(7). LOCK SCALE (Check the LON cable)
(8). OPEN SCALE (Release the lock after checking the LON cable.)
(9). CHANGE PAGE
n
Select a DLL data using the NEXT PLU and – keys.
ENTER |
The error terminal ID# is displayed. Use
the NEXT PLU and
– keys.
Release the scale from the error.
CLEAR |
p
Errorous terminal
# is displayed.
Release the scale from the error.
0:CANCEL
1:RETRY
2:CONTINUE
Select one of the above using the NEXT PLU and – keys.
LOCK SCALE method
NOTE: DLL is performed automatically in the following two ways. It is selectable by the Initial Settings
(1)LOCK SCALE method
Step 1: “LOCK SCALE” is sent. (*1)
Step 2: Selected data is sent. (*2)
Step 3: “OPEN SCALE” is sent.
*1: If an error occurs during step 1, the error terminal ID# is indicated. Select
“cancel”, “retry” or “continue” to release the terminal from an error.
cancel: | Quits the operation after sending “OPEN SCALE” |
retry: | Tries to send “LOCK SCALE” again. |
continue: | Ignores the error terminal and starts DLL. |
*2 If an error occurs during step 2, the error terminal ID# is indicated. Press the CLEAR key to return to the DLL data selection menu.
(2)Background DLL
Step 1: Selected data is sent. (*3)
*3 If an error occurs, the error terminal ID# is indicated. Press the CLEAR key to return to the DLL data selection menu.