Toshiba H-9100N-CA, EO1-32003BE, H-9100N-US owner manual DATE/TIME Setting, CMT Operations

10. PROGRAMMING PROCEDURES

10.12 DATE/TIME SETTING

10.12 DATE/TIME SETTING

Menu Page: 2

Item No.: 1

Date, time, machine number, and store code are set with this procedure.

<MENU>

Page 2

k

1

Set the date.	ENTER
(Month, Day, Year)

Set the time. (Hour, Minute)

ENTER

Set the machine No.

(max. 6 dig.)

ENTER

Set the store No.

(max. 5 dig.)

ENTER

k

PROG.

ESC.

<MENU>

Page 2

Main

<MENU>

NOTES:

1.Express the time in a 24-hour military format.

2.The H-9100N will check details of date (time) input, and any wrong date (time) will result in an error

mode. Then the correct date (time) should be re-entered and press the CLEAR key.

3.Even when initial Setting# 8-4, 8-5 or 8-6 is set to the “Julian Date” side, the way to enter the date in the date setting operation is the same as in the ordinary case.

4.The date display method can be changed by the initial setting.

10.13 CMT/PL-3

Menu Page: 2

Item No.: 2

■CMT Operations

The H-9100N is designed to interface with a Cassette Magnetic Tape loader. This loader allows the transfer of the entire PLU file, ingredient file and other data from the H-9100N to tapes. This can be accomplished in number of operation steps.

In turn, information from the tape can also be transferred to another H-9100N scale.

<MENU>	2	Set the transmission items.			<MENU>
		(Refer to table 4)	ENTER	PROG.
Page 2					Page 2

	ESC.	Main
NEXT or
		<MENU>
PLU

NOTES:

1.The error mode can be released by pressing the CLEAR key, and you can operate again through the above steps.

2.Use the metal cassette tape which is commercially available and has a capacity of 45 or 60 minutes recording.

3.For operations of the CMT loader, refer to the instruction manual provided with the CMT loader.

10-20