Toshiba H-9100N-US, H-9100N-CA, EO1-32003BE owner manual Data Transmission, Cancel Retry Continue

10. PROGRAMMING PROCEDURES

	10.15 LON SYSTEM
■ Data Transmission
The following data are down-line-loaded.
Page 1: (0). All (PLU+ING+NUTRI)	Page 2: (0). SPEED KEY
(1). PLU	(1). LOGO
(2). ING.	(2). VENDOR
(3). NUTRITION	(3). FREE FORMAT
(4). U. PRICE	(4). ADDRESS
(5). DATE/TIME	(5). INITIAL
(6). MESSAGE LINK (Message)	(9). CHANGE PAGE
(7). LOCK SCALE (Check the LON cable)

(8). OPEN SCALE (Release the lock after checking the LON cable.)

(9). CHANGE PAGE

n

Select a DLL data

using the NEXT PLU and - keys.

ENTER

p

Release the scale from the error.

0:CANCEL

1:RETRY

2:CONTINUE

NOTE: DLL is performed automatically in the following two ways. It is selectable by the Initial Settings #0-6 and #0-7.

(1) LOCK SCALE method

Step 1: “LOCK SCALE” is sent. (*1)

Step 2: Selected data is sent. (*2)

Step 3: “OPEN SCALE” is sent.

*1: If an error occurs during step 1, the error terminal ID# is indicated. Select “cancel”, “retry” or “continue” to release the terminal from an

error.
cancel:	Quits the operation after sending “OPEN SCALE”
retry:	Tries to send “LOCK SCALE” again.
continue: Ignores the error terminal and starts DLL.
*2: If an error occurs during step 2, the error terminal ID# is indicated.
Press the	CLEAR	key to return to the DLL data selection menu.
(2) Background DLL
Step 1: Selected data is sent.		(*3)

*3: If an error occurs, the error terminal ID# is indicated. Press the CLEAR key to return to the DLL data selection menu.

10-25