Contents, General Information | Altek 830-KP specification

CONTENTS
GENERAL OPERATING INSTRUCTIONS	3
TURN ON	3
CONNECTIONS	3
FIELD & BENCH USE (TILT STAND)	4
CHANGING BATTERIES	4
CONFIGURING TEMPERATURE SCALES	5
ENABLING AUTO-OFF	5
RESTORING DEFAULT SETTINGS	5
DISPLAY CONTRAST & BACKLIGHTING	6
SELECTING FUNCTIONS & RANGES	7
SOURCE MODE OPERATING INSTRUCTIONS	8
STORING & RECALLING QUIK-CHEK®OUTPUTS .8
SOURCE MODE CONNECTION INSTRUCTIONS
CALIBRATE MILLIAMP INPUTS	9
SIMULATE 2-WIRE TRANSMITTERS	10
CALIBRATE VOLTAGE INPUTS	11
CHECK 1-5 VOLT INPUTS WITHOUT
DISCONNECTING WIRES	12
CALIBRATE THERMOCOUPLE INPUTS	14
CALIBRATE RESISTANCE INPUTS	15
CALIBRATE RTD INPUTS	16
CALIBRATE FREQUENCY INPUTS	18
READ MODE OPERATING INSTRUCTIONS	19
MIN/MAX	19
OUT OF RANGE SIGNALS	19
READ MODE CONNECTION INSTRUCTIONS
READ MILLIAMP OUTPUTS	20
READ VOLTAGE OUTPUTS	21
READ AC VOLTAGES	22
MEASURE THERMOCOUPLE SENSORS	23
READ RESISTANCE	24
CHECK CONTINUITY	25
MEASURE RTD SENSORS	26
COUNT FREQUENCIES	28
CALIBRATE 2 & 4 WIRE TRANSMITTERS	30
PRESSURE (WITH COMPANION PRESSURE MODULES)
READ PRESSURE	32
CALIBRATE PRESSURE TRANSMITTERS	34
SPECIFICATIONS	36
WARRANTY	44

GENERAL INFORMATION

Your New TechChek 830-KP

Lighten your load… take the TechChek 830-KP to every site. It’s like bringing a cartload of test equipment from the shop to the control room or the ﬁeld. The TechChek 830-KP sources and reads DC like a milliamp or voltage calibrator, simulates and measures T/Cs & RTDs like a temperature calibrator, generates and counts frequency and Counts-Per- Minute like a frequency calibrator and displays pressure like a precision test gauge. Troubleshooting? It checks continuity with a beeper and measures AC line voltage like a multimeter!

Calibrate Milliamp Inputs

Calibrate controllers, recorders and other devices in 4 to 20 or 0 to 20 mA loops. Source and read 0.00 to 24.00 mA, or Simulate a 2-Wire Transmitter. Use the optional AC adaptor for continuous operation. Display to 0.01 mA , 0.1 % of 4 to 20 and 0.1 % DP Flow.

Calibrate 2-Wire Transmitters

Easily calibrate 2-Wire Pressure and Electronic Transmitters by connecting the TechChek 830-KP to both the input and output of the transmitter. The TechChek 830- KP will simultaneously indicate the input and output of the transmitter on the graphical display.

Calibrate Pressure Systems

Read pressure with extreme accuracy using an external QuikCal pressure module in a companion ModPak module holder. Attach the module directly to the pressure connection for the best accuracy or with optional tubing for tight spots. Display to ﬁve digits within 0.025% of reading in up to 20 engineering units including psi, pa, Kpa, Mpa,

CONTENTS

GENERAL INFORMATION