A&D 1WMPD4002313 manual OP-04 RS-422, Multi-connection with Print key mode new function

Command	H	I	,	+	0	0	1	0	0	CR	LF
Reply	H	I	,	+	0	0	1	0	0	CR	LF
Command	L	O	,	+	0	0	1	0	0	CR	LF
Reply	L	O	,	+	0	0	1	0	0	CR	LF

Assume 2 decimal place number. 1.00% will be set as LO limit %.

Assume 2 decimal place number. 1.00% will be set as LO limit %.

‰Store the comparator limits into the specified memory number. (No reply for f20-1.)

Reply

H I

,

0 1

,

+ 0 0 1 2 0 0

,

+ 0 0 0 9 0 0 CR LF

Reply

M L

,

0 1

,

+ 0 0 1 2 0 0

,

+ 0 0 0 9 0 0 CR LF

9-3. OP-04 RS-422 / 485

The followings are the corrections and the additional information for the optional interface. (“3-2.OP-04 Specifications” in 1WMPD4001368).

Circuit diagram	5	Shield	5	Frame ground FG
	6	Frame ground FG	6	Shield

The frame ground and the shield are connected internally and there is no difference between them in use.

Multi-connection with Print key mode (new function)

This is one of the applications when a PC and more than one FS-D are connected. The indicator will prepare the weighing data by pressing the PRINT key first and will send out the prepared data after receiving a command from the PC.

1.Set the Function “f06-5” for all of the indicators.

2.Weigh something and wait for the STABLE indicator to turn on (the indicator having f18-##).

3. Press the PRINT key, the indicator will temporarily store the weight data and turn the PRINT indicator on.

‰ The indicator does not accept the PRINT key while the PRINT indicator on.

4.Send the “@##S” command to the indicators from the PC.

5.The indicator (f18-##) will respond to the command to send the weight data in memory and turn the PRINT indicator off.

The address ## = 23 (f18-23).

‰A request for weight data.

Command

Reply

Reply

@	2	3	S	CR	LF
@	2	3	S	T	,	+	0	0	1	2	.	3	4	5	_	k	g	CR	LF
@	2	3	I	CR	LF			The indicator does not have any stored data to send.

‰While the PRINT indicator is on, the indicator will send back “@##I” to commands other than “@##S” command.

17