No. | NAMES | FUNCTIONS / OPERATION | |||
|
|
|
|
| |
5 | COMPARISON INDICATORS | Indicates the results of the weight comparison | |||
LO (RED), OK (GREEN) and HI (YELLOW). | |||||
|
| ||||
6 | STABLE ANNUNCIATOR | Turns ON when the weight reading is STABLE. | |||
|
|
|
|
| |
7 | ZERO ANNUNCIATOR | Turns ON when the weight is in the center of | |||
ZERO range. | |||||
|
| ||||
8 | NET ANNUNCIATOR | Turns ON when the display shows the NET | |||
weight. | |||||
|
| ||||
9 | PT ANNUNCIATOR | Turns ON when the display shows the preset tare | |||
weight. | |||||
|
| ||||
10 | PRINT ANNUNCIATOR | Turns ON for a moment when the weight data is | |||
sent by the | PRINT/ENT | or | |||
|
| ||||
|
|
| |||
11 | PRECAUTION AGAINST | Turns ON when the optional battery is getting | |||
| LOW BATTERY | close to low battery. | |||
12 | ON/OFF Key | Turns the power on or off. When turned on, | |||
the | |||||
|
| ||||
| ZERO / ± Key | Zeroes the indicator when the weight is stable. | |||
| Or the key switches the sign “+” & | ||||
|
| ||||
| TARE Key | Zeroes the display and switches to net weight | |||
| mode when the weight is plus and stable. | ||||
|
| ||||
| PT Key | The key is used to enter a tare weight via the | |||
| |||||
|
| ||||
| SAMPLE / 9 Key | To register the sample weight as a target. | |||
| Or the numeric key 9 in the data entry. | ||||
|
| ||||
| KEY / 8 Key | To enter a target weight via the | |||
| Or the numeric 8 in the data entry. | ||||
|
| ||||
| RECALL / 7 Key | To recall target weight and/or HI/LO limits. | |||
| Or the numeric 7 in the data entry. | ||||
|
| ||||
| HI / 6 Key | To enter comparator HI limit via the | |||
| Or the numeric 6 in the data entry. | ||||
|
| ||||
| LO / 5 Key | To enter comparator LO limit via the | |||
| Or the numeric 5 in the data entry. | ||||
|
| ||||
| STORE / 4 Key | To store target weight and/or HI/LO limits. | |||
| Or the numeric 4 in the data entry. | ||||
|
| ||||
| DISP. / 3 Key | Switches the analog sweep display modes. | |||
| Or the numeric 3 in the data entry. | ||||
|
| ||||
| UNITS / 1 Key | To select the desired weighing unit. | |||
| Or the numeric 1 in the data entry. | ||||
|
| ||||
| PRINT / ENT Key | To send a data string through the optional | |||
| interface. Or to ENTER the numeric data. | ||||
|
| ||||
| C Key | The key to clear an incorrect data entry from the | |||
| numeric keypad. | ||||
|
| ||||
| 0 and 2 Keys | The numeric keys 0 and 2. | |||
|
|
|
|
| |
9