A&D SW-150KM, SW-6KS, SW-30KM, SW-60KL, SW-60KM Entering the comparator values, Print Sample Tare

10.2. Entering the comparator values

1. In the weighing mode, press and hold the SAMPLE value setting mode.

switch to enter the comparator

2. Enter the comparator values using the following switches.

UNITS To shift the blinking digit to the right.

PRINT

SAMPLE

TARE

To increase the value of the blinking digit by one.

To switch the polarity.

Each time the switch is pressed, “-“ is turned on and off at the left- most digit. When on, the value is negative.

To confirm and store the setting value.

3.When the setting is complete, “end” is displayed and the scale returns to the weighing mode.

Five-level comparator mode Three-level comparator mode

	Weighing mode
Press	Press
and hold	and hold
	To set the LOLO
	limit value
Press	Press
	To set the LO
	limit value

Weighing mode

To set the LO limit value

To set the HI limit value

Press

Press

Press

Press

To set the HI limit value

To set the HIHI limit value

Weighing mode

Weighing mode

18