A&D SW-15KM, SW-6KS, SW-30KM, SW-60KL, SW-60KM manual OP-03 RS-232C / Relay Output, Installing OP-03

Page 29

13.2. OP-03 RS-232C / RELAY OUTPUT

This interface allows the SW scale to be connected to an AD-8121 printer or a personal computer, and the relay outputs for comparator results are also available.

When OP-03 is installed, the dust-tight and water-tight performance of the scale will be degraded.

OP-03 includes an interface board, two connector cables (7 and 10 pins), two cable glands and two screws (M3x8).

13.2.1. Installing OP-03

M4 screw (10 pcs)

Display rear cover

M3x8 screws

Interface board

Connector cable

Cable glands

To the external device

Peel

6 mm (AWG 26~16)

Terminal block

1.LOLO

2.LO

3.OK

4.HI

5.HIHI

6.COM 7.SHLD

1.RXD

2.TXD

3.DSR

4.SG

5.SHLD

27

Image 29

Contents SW Series Page Contents Specifications MaintenanceOptions Gravity Acceleration MAPClassification of protection provided by enclosures ComplianceCompliance with FCC rules Introduction FeaturesInstalling the scale PrecautionsCleaning the scale Operating the scaleUnpacking Display rear side Description of Each PartSymbols Display and symbolsSymbol Description DisplaySwitches SW-M / L series with a display pole Setting UPAttaching the display pole to the base Installing the scale Basic Operation Turning the power on and OFFBat oo ON/OFFSelecting a weighing unit Indicator will not turn onBasic weighing operation During the Tare operationWeight display resolution Print Counting ModeComparator Five-level comparator modeFormula to compare LoloThree-level comparator mode Print Sample Tare Five-level comparator mode Three-level comparator modeEntering the comparator values Gravity acceleration correction CalibrationUnits Print Calibration using a weightRestoring the factory set values Tare ON/OFF Setting the parametersFunctions Function list Key Options Using the OP-02 SLA batteryInstalling the battery Charging the battery OP-03 RS-232C / Relay Output Installing OP-03Ascii OP-03 SpecificationsSolid sate relay ‰ Data example Command mode Stable positive data Page OP-04 RS-422 Installing OP-04OP-04 Specifications Example of connection RS-422 Stable data Error codes MaintenanceModel SW-6KS SW-15KS SW-15KM SW-30KM SpecificationsSpecifications SW-60KL Model SW-60KMExternal dimensions SW-60KL / SW-150KL with a display pole Values of gravity at various locations Gravity Acceleration MAPWorld map